Earticle

초록

영어

In this study, the distribution of internal temperature and flow by forced blowing of the refrigeration unit installed in a truck were investigated. The temperature stability inside the box was measured from the experiment using the standard calorimeter and the constant temperature and humidity chamber. Using the computerized analysis method, the uniformity of temperature and flow inside the box was verified in the longitudinal direction(central section) and unidirectional direction(lateral sections of ⅓ and ⅔ points) of the box. The set temperature inside the box was -20℃, and the air flow rate of the refrigeration unit were 70, 80 and 90㎥/min. In the temperature stability experiment, the temperature deviation inside the box was within ±1℃ of the set value. The faster the air flow rate of the refrigeration unit, the lower the temperature and flow uniformity. The temperature and flow uniformity inside the box were most effective at 70㎥/min. Because the temperature and flow deviation were the smallest in the longitudinal direction and the upper and lower section.

목차

Abstract
1. 서론
2. 실험 및 해석 방법
3. 실험 결과 및 고찰
3.1 박스 내부의 온도 안정성 실험
3.2 박스 내부의 온도 균일성 해석
3.3 박스 내부의 유동 균일성 해석
4. 결론
References

키워드

전산해석 유동 내부온도 냉동유닛 탑차 균일성 Computer analysis Flow Internal temperature Refrigerator Unit Truck Uniformity

저자

• 최연성 [ Youn-Sung Choi | Department of Mechanical Engineering, Sunmoon University, Graduated student ]
• 왕쩐후안 [ Zhen Huan Wang | Department of Mechanical Engineering, Sunmoon University, Graduated student ]
• 권영철 [ Young-Chul Kwon | Mmber, Department of Mechanical Engineering, Research Institute for Industrial Technology, Sunmoon University, Professor ] Corresponding author

참고문헌

발행기관

간행물