Earticle

초록

영어

This paper presents a conceptual design approach of air-cored synchronous machine with high temperature superconductor (HTS) field winding. With a given configuration of a target machine, boundary conditions are set in the cylindrical coordinate system and analytic field calculation is performed by solving a governing equation. To set proper boundary conditions, current distributions of the field winding and the armature winding are expressed by the Fourier expansion. Based on analytic magnetic field calculation results, key machine parameters are calculated: 1) inductance, 2) critical current of field winding, 3) weight, 4) HTS conductor consumption, and 5) efficiency. To investigate all potential design options, 6 sweeping parameters are determined to characterize the geometry of the machine and the parameter calculation process is performed for each design options. Among design options satisfying constraints including >80 % critical current margin and >95 % efficiency, in this paper, a first-cut design was selected in terms of overall machine weight and HTS conductor consumption to obtain a lightweight and economical design. The goal is to design a 5-MW machine by referring to the same capacity machine that was previously constructed by another group. Our design output is compared with finite element method (FEM) simulation to validate our design approach.

목차

Abstract
1. INTRODUCTION
2. CONCEPTUAL DESIGN METHOD BASED ON PARAMETER SWEEP APPROACH
2.1. Design Flowchart for Parameter Sweep Approach
2.2. Analytic Parameter Calculation of Air-cored HTS Machine
3. EXAMPLE 5-MW MOTOR DESIGN AND ACCURACY VERIFICATION OF ANALYTIC PRAMETER CALCULATION
3.1. Input Parameters for 5-MW Motor Design
3.2. Design Results of 5-MW Ship Propulsion Motor
3.3. Comparison between Analytic Parameter Calculation Method and Finite Element Method
4. CONCLUSION
ACKNOWLEDGMENT
REFERENCES

키워드

저자

• Uijong Bong [ Department of Electrical and Computer Engineering, Seoul National University, Seoul, 08826, Korea ]
• Soobin An [ Department of Electrical and Computer Engineering, Seoul National University, Seoul, 08826, Korea ]
• Chaemin Im [ Department of Electrical and Computer Engineering, Seoul National University, Seoul, 08826, Korea ]
• Jaemin Kim [ Department of Electrical and Computer Engineering, Seoul National University, Seoul, 08826, Korea ]
• Seungyong Hahn [ Department of Electrical and Computer Engineering, Seoul National University, Seoul, 08826, Korea ] Corresponding author

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  한국초전도·저온논문지 (구 한국초전도저온공학회논문지) [Progress in Superconductivity and Cryogenics]

• 간기

  계간

• pISSN

  1229-3008

• eISSN

  2287-6251

• 수록기간

  1999~2026

• 등재여부

  KCI 등재,SCOPUS

• 십진분류

  KDC 427 DDC 537