Measurement reliability of irreversible stress/strain limits in Sn-Cu double layer stabilized IBAD/RCE-DR processed GdBCO coated conductor tapes under uniaxial tension at 77 K
Zhierwinjay Bautista, Mark Angelo Diaz, Hyung-Seop Shin, Jae-Hun Lee
언어
영어(ENG)
URL
https://www.earticle.net/Article/A347956
※ 기관로그인 시 무료 이용이 가능합니다.
※ 학술발표대회집, 워크숍 자료집 중 4페이지 이내 논문은 '요약'만 제공되는 경우가 있으니, 구매 전에 간행물명, 페이지 수 확인 부탁 드립니다.
4,000원
원문정보
초록
영어
In this study, the electromechanical properties in Sn-Cu double layer stabilized GdBCO coated conductor (CC) tapes with and without external lamination under uniaxial tension were examined at 77 K and self-field. Their irreversible stress and strain limits were determined using a loading-unloading scheme based on different critical current (Ic) recovery criteria. The repeated tests were performed and statistical estimation was done to check the reproducibility depending on the criterion adopted in evaluating the electromechanical properties. From the results, it showed that the Sn-Cu double-layer stabilized CC tapes have the higher irreversible stress limit, but lower irreversible strain limit as compared to brass laminated ones. Through the repeated tests, it can be found that a small scattering of irreversible limits existed in both CC tape samples. Finally, similar strain sensitivity of Ic in both CC tapes was obtained.
목차
Abstract 1. INTRODUCTION 2. EXPERIMENTAL PROCEDURES 2.1. Samples 2.2. Electromechanical properties tests under uniaxial tension 3. RESULTS AND DISCUSSION 3.1. Mechanical properties of Sn-Cu stabilized CC tapes under uniaxial tension at 77 K 3.2. Electromechanical properties evaluation under uniaxial tension through repeated tests at 77 K 4. SUMMARY ACKNOWLEDGMENT REFERENCES