Earticle

현재 위치 Home

내소사 대웅보전 포벽화 제작기법 연구
Study on Manufacturing Techniques of Bracket Mural Paintings of Daeungbojeon Hall in Naesosa Temple

첫 페이지 보기
  • 발행기관
    한국문화유산보존과학회(구 한국문화재보존과학회) 바로가기
  • 간행물
    보존과학회지 KCI 등재 바로가기
  • 통권
    제34권 제6호 (2018.12)바로가기
  • 페이지
    pp.557-568
  • 저자
    이화수, 이나라, 한규성
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A344805

※ 기관로그인 시 무료 이용이 가능합니다.

4,300원

원문정보

초록

영어
The manufacturing techniques were studied by investigating a precise analysis on wall structure, features of materials and the painting layer of the bracket mural paintings at Daeungbojeon Hall in Naesosa temple. The wall frame is a single-branch structure, and The mural paintings are composed of 3 layers which are a support layer, a finishing layer and a painting layer. The support layer and the finishing layer are an earth wall that sand and clay such as Quartz, Feldspar, and etc. are mixed. The support and the finishing layers have a combination of medium particle sand and smaller than fine particle sand in the approximate ratios of 0.8:9.2 and 6:4, respectively. Therefore, the aforementioned ratio of sand with medium or large particles is relatively higher in the finishing layer than the support layer. As a result of a precise analysis on the painting layer, it has a relatively thick ground layer for painting which is maximum 456.15 μm by using Celadonite or Glauconite and the paintings were colored by using pigments such as Atacamite, Kaolinite or Halloysite, Oxidized steel, and etc. on it. The manufacturing style and the painting techniques of an earth wall are included in the category of the Joseon Dynasty style that have been studied up to now, but the facts that the finishing layer has a high content of sand and a middle layer and chopped straw have not been identified. These are remarkable points in terms of structure and materials, and can be crucial in the evaluation of the state of conservation of mural paintings or preparation of a conservation plan.
한국어
내소사 대웅보전 포벽화에 대한 벽체 구조 및 재질특성 그리고 채색층에 대한 정밀분석을 통해 제작기법을 연구하였다. 벽체 골조는 외가지 구조이며, 벽체층과 마감층 그리고 채색층의 세 층위로 구성되어있다. 벽체를 구성하는 벽체층 및 마감층은 석영과 장석류 등 모래와 황토를 혼합하여 제작하였다. 벽체층은 중립사 이상 크기와 세립사 이하 크기가 약 0.8:9.2 비율이고, 내·외부 마감층은 각각 약 6:4 비율로 벽체층보다 중립사 이상의 모래 비율이 상대적으로 높게 나타났다. 채색층 정밀분석 결과, 뇌록을 사용하여 최대 456.15 μm로 비교적 두꺼운 바탕칠층을 마련하였으며 그 위로 녹염동광 및 백토 그리고 산화철 계통의 안료를 사용하여 채색하였다. 연구결과, 토벽체와 채색층 제작기법은 현재까지 연구된 조선시대 사찰벽화 제작양식 범주에 속하는 것으로 확인되었다. 그러나 마감층 모래 함량이 높고 중벽 층과 짚여물이 확인되지 않는 점 등은 내소사 대웅보전 포벽화 벽체가 지닌 구조 및 재질특성으로서, 이와 같은 결과는 향후 벽화 보존상태 평가 또는 보존처리 방안 마련에 주요 정보가 될 수 있다.

목차

초록
ABSTRACT
1. 서론
2. 연구 방법
2.1. 벽화 육안 조사
2.2. 벽체 재질특성 분석
2.3. 벽체 외가지 및 섬유질 분석
2.4. 채색층 정밀 분석
3. 분석 결과
3.1. 벽화 육안 조사
3.2. 벽체 재질특성 분석
3.3. 벽체 외가지 및 섬유질 분석 결과
3.4. 채색층 정밀 분석
4. 고찰 및 결론
사사
REFERENCES

키워드

포벽화 토벽체 채색층 제작기법 보존 Bracket mural paintings Earth wall Painting layer Manufacturing technique Conservation

저자

  • 이화수 [ Hwa Soo Lee | 충북대학교 목재 · 종이과학과 ]
  • 이나라 [ Na Ra Lee | 충북대학교 문화재보존기술지원센터 ]
  • 한규성 [ Gyu-Seong Han | 충북대학교 목재 · 종이과학과 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국문화유산보존과학회(구 한국문화재보존과학회) [The Korea Society of Conservation Science for Cultural Heritage]
  • 설립연도
    2003
  • 분야
    자연과학>자연과학일반
  • 소개
    본 법인은 문화재 과학적 보존에 관한 제반 학술적 연구 발전 보급을 위하여 문화재 보존기술 개발과 수리 및 복원에 관한 방법을 연구함으로서 문화재의 보존 및 계승에 기여함을 그 목적으로 한다.

간행물

  • 간행물명
    보존과학회지 [Journal of Conservation Science]
  • 간기
    연5회
  • pISSN
    1225-5459
  • eISSN
    2287-9781
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 602 DDC 700

이 권호 내 다른 논문 / 보존과학회지 제34권 제6호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장