Dimming control is required when daylight is to be introduced into the room. In this case, the work surface illuminance must be sensed in real time and fed back. However, when the illuminance sensor is installed on the work surface, it is difficult to use the work surface, and it is difficult to accurately detect the illuminance by residents or objects. In order to solve the inconvenience of installation of the work surface illuminance sensor, the illuminance sensor is attached to the ceiling to feedback control the work surface illuminance. At that time, the relationship between the work surface illuminance and the ceiling illuminance is required, but there have been few studies related to this in Korea and abroad. The research propose and analyze a method to simultaneously measure and analyze the illuminance distributions of work surface and ceiling. The research installed 45 illuminance detectors in combination with Arduino, illuminance sensor and radio system to measure the illuminance of the ceiling. In the model building (3,840W×5,980D×2,570H) of this research, the reflectance of the ceiling material, wallpaper and flooring were 79.9, 83.4 and 40.4% respectively and the lighting equipment was 5,700K, 50W, 1,280L×320W, 4,000lm, lighting efficiency 80lm/W, LED 3Set. In this research, average illuminance of work surface and ceiling were 560 and 202lx, respectively, and average illuminance ratio(ceiling/work surface) was 0.37 on the basis of work surface illuminance. It is necessary to further study the relationship between the ceiling and work surface illuminance ratio with the reflectance of the wall.
목차
Abstract 1. 서론 1.1 연구의 배경 및 목적 1.2 연구의 방법 및 범위 1.3 관련 연구 동향 2. 조명 이론고찰 2.1 조도의 법칙 3. 작업면과 천장면 조도 측정 실험 3.1 측정기기 및 모델 건물 3.2 작업면 및 천장면 조도 측정 실험 3.3 작업면과 천장면 조도 비율 분석 4. 조도 시뮬레이션 및 비교 4.1 작업면 조도 시뮬레이션 및 비교 4.2 천장면 조도 시뮬레이션 및 비교 5. 결론 REFERENCES
키워드
작업면 조도천장면 조도디밍제어조도측정동시측정Illuminance of work surfaceIlluminance of ceilingDimming controlIlluminance MeasurementSimultaneous Measurement
저자
서재윤 [ Seo, Jae-Yoon | 정회원, 부경대학교 대학원 건축공학과, 박사과정 ]
대한건축학회지회연합회 [The Regional Association of Architectural Institute of Korea]
설립연도
2000
분야
공학>건축공학
소개
본회는 건축에 관한 학술․ 예술․ 기술을 연구 연마하는 지회회원들의 입지향상과 회원상호간의 친목도모와 함께 건축 문화창달에 기여함을 목적으로 한다.
목적을 달성하기 위하여 다음의 사업을 한다.
1. 지회회원의 입지향상과 친목도모
2. 건축에 관한 조사․연구지도 및 이에 관련된 사업
3. 회지, 논문집, 연구보고서 기타 건축에 관한 도서의 간행
4. 건축에 관한 강습회․강연회․간담회․전람회․견학회 등의 개최
5. 건축에 관한 계획, 감독, 기술검토에 대한 국가공공기관 기타의뢰에 관한 사항
6. 국내외 관계 제 학회와의 교류 및 회의참석
7. 기타 본회 목적달성에 필요한 사업
간행물
간행물명
대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]