Earticle

현재 위치 Home

전기자동차의 연비향상을 위한 매입형 영구자석 동기전동기의 효율특성 분석
Analysis on Efficiency Characteristics of IPMSM for fuel Economy Improve of Electric Vehicle

첫 페이지 보기
  • 발행기관
    한국융합학회 바로가기
  • 간행물
    한국융합학회논문지 KCI 등재 바로가기
  • 통권
    제9권 제4호 (2018.04)바로가기
  • 페이지
    pp.1-7
  • 저자
    김종희, 김기찬, 이대동
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A327286

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
Electric motors for electric vehicles differ in efficiency characteristics depending on the operation modes, studies for evaluating high efficiency characteristics in low speed and high speed operation modes are very important. Therefore, it is necessary to design method that can change the high torque, high output density, and high efficiency characteristics of driving motors for electric vehicles. In this paper, the diameter ratio of stator and rotor for the interior permanent magnet synchronous motor is change of designed 0.62, 0.65, and 0.68, respectively, and the efficiency characteristics of the entire operation section, average efficiency characteristics of the city driving modes and express highway driving modes are analyzed. As a result of analyzing the efficiency characteristics of the entire operating section, it was confirmed that as the diameter ratio increases, the high efficiency section moves to the low speed and low torque section and the high efficiency section moves to the high speed and low torque neighborhood as the diameter ratio decreases. As a result of analyzing the average efficiency characteristics in the city driving modes and express highway driving modes, the average efficiency of 0.68 model is analyzed to be more efficient than the 0.63 and 0.65 model ratio, and it is confirmed that it is suitable for city driving modes and express highway driving modes.
한국어
전기자동차용 전동기는 운전모드에 따라 효율특성이 차이가 나기 때문에 저속 및 고속의 운전모드에서 고효율특성 을 평가하기 위한 연구는 매우 중요하다. 따라서 전기자동차 구동용 전동기의 고토크 및 고출력 밀도, 고효율특성을 변경할 수 있는 설계 방안이 필요하다. 본 논문에서는 매입형 영구자석 동기전동기의 고정자와 회전자의 직경비를 각각 0.62, 0.65, 0.68로 변경 설계하여 전 운전구간의 효율특성과 시내 및 고속도로 운전모드에서의 평균효율특성을 분석하였다. 전 운전구 간의 효율특성을 분석한 결과, 직경비가 증가할수록 고효율 구간이 저속 저토크 구간으로 이동하고, 직경비가 감소할수록 고효율 구간이 고속 저토크 부근으로 이동함을 확인하였다. 시내 및 고속도로 운전모드에서의 평균효율특성을 분석한 결과, 직경비 0.68 모델이 직경비 0.63 및 0.65 모델보다 평균효율이 높게 분석되었으며 시내 및 고속도로 주행모드에 적합함을 확인하였다.

목차

요약
 Abstract
 1. 서론
 2. IPMSM 해석 모델 사양 및 전자기적 특성
 3. 결과 및 분석
  3.1 직경비에 따른 IPMSM의 효율특성 분석
  3.2 운전모드에 따른 평균효율특성 분석
 4. 결론
 REFERENCES

키워드

매입형 영구자석 동기전동기 연비 직경비 전기자동차 효율특성 IPMSM Fuel economy Diameter ratio EV Efficiency characteristics

저자

  • 김종희 [ Jong-Hee Kim | 한밭대학교 전기공학과 ]
  • 김기찬 [ Ki-Chan Kim | 한밭대학교 전기공학과 ]
  • 이대동 [ Dae-Dong Lee | 한밭대학교 전기공학과 ] Corresponding author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국융합학회 [Korea Convergence Society]
  • 설립연도
    2011
  • 분야
    복합학>학제간연구
  • 소개
    본회는 융합학문 및 융합기술을 교류를 통한 학문기술의 확대․발전․보급 및 기술개발 전략에 과학적으로 접근하여 융합학문 및 기술을 더욱 활성화하고, 회원 상호간의 정보 교류를 도모함으로써 지역과 나라발전에 기여함을 목적으로 한다.

간행물

  • 간행물명
    한국융합학회논문지 [Journal of the Korea Convergence Society]
  • 간기
    월간
  • pISSN
    2233-4890
  • 수록기간
    2010~2022
  • 십진분류
    KDC 530 DDC 620

이 권호 내 다른 논문 / 한국융합학회논문지 제9권 제4호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장