Earticle

현재 위치 Home

<생산기술>

스티어링 휠 다이나믹 댐퍼의 방진고무 강성 파라메터 연구
Study on Damping Stiffness Parameter of Steering Wheel Dynamic Damper

첫 페이지 보기
  • 발행기관
    한국기계항공기술학회(구 한국기계기술학회) 바로가기
  • 간행물
    한국기계항공기술학회지(구 한국기계기술학회지) KCI 등재 바로가기
  • 통권
    제20권 제1호 (2018.02)바로가기
  • 페이지
    pp.120-126
  • 저자
    남재현, 박기완, 강재영
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A324094

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
The purpose of this study is to determine the stiffness of rubber of dynamic damper. This damper system reduces the steering wheel vibration caused by idling oscillation of the engine. Therefore, in order to measure the stiffness of the silicone rubber in the dynamic damper system, the material test of the silicone rubber was carried out. Using the measured stiffness, the FEM model of the dynamic damper system was constructed and the correlation by the experimental data was shown at an error of less than 2%. In addition, the dynamic damper system was simplified to a two-degree-of-freedom spring-mass model and the effect of the stiffness change of the rubber on the natural frequency of the column shaft was analyzed theoretically. As a result, the amplitude of the column shaft was reduced as the stiffness of the silicone rubber was lowered.

목차

ABSTRACT
 1. 서론
 2. VMQ 실리콘 고무 물성시험 및 해석
  2.1 다이나믹 댐퍼 시스템
  2.2 VMQ 실리콘 고무 물성 특성 시험
  2.3 충격망치시험 및 모달해석
 3. 다이나믹 댐퍼 파라메터 스터디
  3.1 다이나믹 댐퍼 시스템 이론 모델
  3.2 VMQ silicon rubber의 강성 파라메터 스터디
 4. 결론
 후기
 References

키워드

Steering wheel(스티어링 휠) Dynamic damper(다이나믹 댐퍼) Natural frequency(고유 진동수) Modal analysis(모달 해석) Damping rubber(방진고무)

저자

  • 남재현 [ Jae-Hyeon Nam | Kongju national university ]
  • 박기완 [ Ki-Wan Park | Kongju national university ]
  • 강재영 [ Jae-Young Kang | Member, Kongju national University ] Corresponding author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국기계항공기술학회(구 한국기계기술학회) [Korean Society of Mechanical Technology]
  • 설립연도
    1999
  • 분야
    공학>기계공학
  • 소개
    기계 관련 산업 분야에 관한 학술과 현장 적용 기술을 연구하고 교류하며, 이에 관련된 학문과 기술 발전 및 보급에 기여함으로써 과학과 기술의 진흥에 이바지함을 그 목적으로 한다.

간행물

  • 간행물명
    한국기계항공기술학회지(구 한국기계기술학회지) [Journal of the Korean Society of Mechanical and Aviation Technology ]
  • 간기
    격월간
  • pISSN
    1229-604X
  • eISSN
    2508-3805
  • 수록기간
    1999~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 550 DDC 620

이 권호 내 다른 논문 / 한국기계항공기술학회지(구 한국기계기술학회지) 제20권 제1호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장