Earticle

현재 위치 Home

A Study of the design method for Interactive squat exercise Instrument
인터렉티브 스쿼트운동기구의 설계방법에 관한 연구

첫 페이지 보기
  • 발행기관
    한국융합학회 바로가기
  • 간행물
    한국융합학회논문지 KCI 등재 바로가기
  • 통권
    제9권 제2호 (2018.02)바로가기
  • 페이지
    pp.303-311
  • 저자
    Byeong-Ho Jeong, Ju-Hoon Park, Ji-won Kim
  • 언어
    영어(ENG)
  • URL
    https://www.earticle.net/Article/A323620

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
Squat exercise is one of the free weight exercises that are recognized as important from a bio-mechanical point of view. It is an important exercise to train lower extremity muscles in daily activities or sports activities and to strengthen trunk and lower body strength. It is effective and accurate to use a variety of assistive devices to calibrate athletic posture with squat exercise supported interactive device. The issues of the structural analysis for design a foot plate for squat exercise is to model the behavior by simplifying the dynamic behavior. In this paper, the authors proposed a exercise system design method for the vertical load distribution and bio-mechanical signal process used for the squat exercise mechanism analysis, and based on these results, designed device can make the more safe and reliable free weight exercise. It is applied to system design through design method with kinematic dynamic, VR device and estimation model of exercise.
한국어
스쿼트운동은 안전하고 효과적인 운동성과를 기대할 수 있는 중요한 프리웨이트운동의 하나로 하체강화운동에 가장 효과적인 운동으로 알려져 있다. 인터렉티브 스쿼트운동 장치를 활용하여 동적인 운동과정을 단순화하여 스쿼트 운동 동작을 모델링하고 이를 기반으로 한 생체신호 및 동작 분석을 수행할 수 있으며 또한 장치를 통해 사용자 자세교정을 통해 올바르고 효과 높은 스쿼트운동 과정을 확립할 수 있다. 제안된 모델링을 기반으로 설계된 풋플레이트에 위치한 로드 셀의 검출된 신호를 활용하여 스쿼트동작을 생체신호검출과 검출된 신호처리과정을 거쳐 스쿼트운동의 오류동작을 검출해 내는 신호출력을 확보할 수 있다. 본 논문에서 제안된 인터랙티브 스쿼트운동장치의 설계방법과 동작의 안전성 분석방법은 생체역학 신호처리 방법에 기인하며 사용자의 스쿼트 운동자세를 해석을 위한 검출된 생체신호 및 동작신호를 통해 올바 르지 못한 스쿼트 동작을 교정함으로서 바른 스쿼트 운동을 유도할 수 있으며 연구 결과를 VR 장치에 적용하거나 운동 평가를 위한 장치로 활용할 수 있다.

목차

Abstract
 요약
 1. Introduction
 2. Mechanical analysis method of the Squat exercise
  2.1 Correct squat exercise method
  2.2 Mechanical analysis of squat exercise method
  2.3 Classification of the squat exercise position
 3. Design of the Squat exercise equipment
  3.1 Design method of the Squat exercise equipment
  3.2 Bio-sensing and FSR filter design using load cell
 4. Experiment results
  4.1 Squat exercise equipment
  4.2 Squat exercise equipment
 4. Conclusion
 REFERENCES

키워드

스쿼트운동 신호처리 생체신호 생체역학신호처리 성능분석 Squat Exercise Signal processing Bio-Signal Bio-machenical design Performance analysis

저자

  • Byeong-Ho Jeong [ 정병호 | Division. of Automotive, Nambu University ]
  • Ju-Hoon Park [ 박주훈 | Division. of Automotive, Nambu University ]
  • Ji-won Kim [ 김지원 | Dept. of Physical Therapy, Nambu University ] Corresponding author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국융합학회 [Korea Convergence Society]
  • 설립연도
    2011
  • 분야
    복합학>학제간연구
  • 소개
    본회는 융합학문 및 융합기술을 교류를 통한 학문기술의 확대․발전․보급 및 기술개발 전략에 과학적으로 접근하여 융합학문 및 기술을 더욱 활성화하고, 회원 상호간의 정보 교류를 도모함으로써 지역과 나라발전에 기여함을 목적으로 한다.

간행물

  • 간행물명
    한국융합학회논문지 [Journal of the Korea Convergence Society]
  • 간기
    월간
  • pISSN
    2233-4890
  • 수록기간
    2010~2022
  • 십진분류
    KDC 530 DDC 620

이 권호 내 다른 논문 / 한국융합학회논문지 제9권 제2호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장