Earticle

초록

영어

Design of Reverse Stirling Cycle based refrigerator can be predicted by Schmidt theory as a useful tool and by experiment it is found that for practical purposes the power and efficiency predicted by this analysis are about 35% of the actual values. Therefore, appropriate provision is to be made for getting the realistic result with the minimum deviation. The present paper first investigates the suitability of application of Schmidt design analysis for standard ZIF-1002 and PLN-106 Single cylinder Cryogenerator model. As the result is found to be optimistic, the same design procedure is applied for the design of a separate Cryogenerator for generating a cooling effect which is sufficient to produce 7 kg per hour liquid nitrogen using an indigenous condenser of 80% effectiveness. The paper describes all the details of the design methodologies and relevant results are found to be satisfactory.

목차

Abstract
 1. INTRODUCTION
 2. CRYOCOOLER DESIGN
  2.1. Effect of principal design parameters on cold production
 3. SCHMIDT THEORY IN THE DESIGN OF CRYOGENERATOR UNITS
  3.1. Refrigerating effect evaluation of Cryogenerator units
  3.2. Design of the expansion zone and compression zone
 4. INDIGENOUS DEVELOPMENT OF THE CRYOGENERATOR
 5. DESIGN OF THE CRYOGENERATOR
 6. RESULT AND DISCUSSION
 7. CONCLUSION
 NOMENCLATURE
 ACKNOWLEDGMENT
 REFERENCES

키워드

저자

• Debajyoti Roy Chowdhury [ Centre for Rural & Cryogenic Technologies, Jadavpur University, Kolkata 700032, India ]
• Nathuram Chakraborty [ Centre for Rural & Cryogenic Technologies, Jadavpur University, Kolkata 700032, India ]
• Swapan Chandra Sarkar [ Centre for Rural & Cryogenic Technologies, Jadavpur University, Kolkata 700032, India ] Corresponding author

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  한국초전도·저온논문지 (구 한국초전도저온공학회논문지) [Progress in Superconductivity and Cryogenics]

• 간기

  계간

• pISSN

  1229-3008

• eISSN

  2287-6251

• 수록기간

  1999~2026

• 등재여부

  KCI 등재,SCOPUS

• 십진분류

  KDC 427 DDC 537