Earticle

현재 위치 Home

로드셀을 이용한 컬링 스위핑 힘 측정 장치 개발
Development of a force measurement device for curling sweeping with load cells

첫 페이지 보기
  • 발행기관
    한국융합학회 바로가기
  • 간행물
    한국융합학회논문지 KCI 등재 바로가기
  • 통권
    제8권 제11호 (2017.11)바로가기
  • 페이지
    pp.49-56
  • 저자
    이상철, 김태완, 길세기, 최상협
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A313867

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
Curling sweeping is one of important motion to control the position of the curling stone, and sweeping speed and applied force to the broom pad are major research subjects. In this study, a device was developed to measure the force applied to the curling broom pad in curling sweeping motion, and two load cells were mounted between the broom pad and pad holder. Analog signals generated from the load cells were sampled about 300 times per second using a micro controller, and then converted to 10-bit digital signals. Calibration of the load cell and set up of regression equations to convert the measured electrical signals into mass (force) was done by three M1 class weights , and the developed system was designed as wearable device to minimize increasing of total weight of the broom. Same force was applied to the developed system and a force plate that was using as a reference force measurement system in field of sports, and the difference between the measured values were ​​showed about 0.909 ± 1.375N(mean and standard deviation). The developed system could be applied other kinds of study which required force measurement function similar to sweeping motion.
한국어
컬링 스위핑 동작은 컬링 스톤의 위치를 조절하는 중요한 동작 중 하나이며, 스위핑 속도와 브룸 패드에 가해지는 힘이 중요한 연구 대상이다. 본 연구에서는 컬링 스위핑 동작에서 컬링 브룸 패드에 가해지는 힘을 측정 할 수 있는 장비를 개발하였으며, 두 개의 로드셀을 브룸 패드와 패드 홀더 사이에 장착하는 구조를 이용하였다. 로드셀에서 발생되는 아날로그 신호는 마이크로 제어기를 이용하여 초당 약 300회의 속도로 샘플링을 수행한 후 10 bit 디지털 신호로 변환하였다. 3개의 M1 급 분동을 이용하여 로드셀의 교정과 측정된 전기 신호를 질량(힘)으로 환산하는 회귀 방정식을 추출하였으며, 브룸의 무게 증가를 최소화하기 위해서 웨어러블 장비로 구성하였다. 스포츠분야에서 힘 측정 시 기준 장비로 사용하는 지면 반력기와 개발된 장비에 동일한 힘을 가하면서 측정된 측정값 차이는 약 0.909±1.375N (평균과 표준 편차)로 측정되었다. 개발된 장비는 스위핑 동작과 유사한 힘 측정을 필요로 하는 다른 종류의 연구에도 적용이 가능할 것으로 판단된다.

목차

요약
 Abstract
 1. 서론
 2. 연구방법
  2.1 개발 장비의 구성
  2.2 센서 배치
  2.3 프로그램 및 신호처리
 3. 연구결과
 4. 논의
 5. 결론 및 제언
 REFERENCES

키워드

컬링 스위핑 브룸 패드에 가해지는 힘 로드셀 마이크로 제어기 회귀식 Curing sweeping applied force to the broom pad load cell micro controller regression equation.

저자

  • 이상철 [ Sangcheol Lee | 한국스포츠개발원 ]
  • 김태완 [ Taewhan Kim | 한국스포츠개발원 ] Corresponding author
  • 길세기 [ Sekee Kil | 한국스포츠개발원 ]
  • 최상협 [ Sanghyup Choi | 고려대학교 ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국융합학회 [Korea Convergence Society]
  • 설립연도
    2011
  • 분야
    복합학>학제간연구
  • 소개
    본회는 융합학문 및 융합기술을 교류를 통한 학문기술의 확대․발전․보급 및 기술개발 전략에 과학적으로 접근하여 융합학문 및 기술을 더욱 활성화하고, 회원 상호간의 정보 교류를 도모함으로써 지역과 나라발전에 기여함을 목적으로 한다.

간행물

  • 간행물명
    한국융합학회논문지 [Journal of the Korea Convergence Society]
  • 간기
    월간
  • pISSN
    2233-4890
  • 수록기간
    2010~2022
  • 십진분류
    KDC 530 DDC 620

이 권호 내 다른 논문 / 한국융합학회논문지 제8권 제11호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장