Earticle

현재 위치 Home

Evaluation of mechanical and thermal properties of insulation materials for HTS power devices at liquid nitrogen temperature

첫 페이지 보기
  • 발행기관
    한국초전도저온학회 (구 한국초전도저온공학회) 바로가기
  • 간행물
    한국초전도·저온논문지 (구 한국초전도저온공학회논문지) KCI 등재 SCOPUS 바로가기
  • 통권
    Vol.19 No.2 (2017.06)바로가기
  • 페이지
    pp.53-57
  • 저자
    Hyung-Seop Shin, Mark Angelo Diaz
  • 언어
    영어(ENG)
  • URL
    https://www.earticle.net/Article/A305446

※ 기관로그인 시 무료 이용이 가능합니다.
※ 학술발표대회집, 워크숍 자료집 중 4페이지 이내 논문은 '요약'만 제공되는 경우가 있으니, 구매 전에 간행물명, 페이지 수 확인 부탁 드립니다.

4,000원

원문정보

초록

영어
In superconducting power devices including power cables in which high temperature superconducting (HTS) tapes are utilized, a reliable electrical insulation should be achieved for its maximum performance. For an efficient design of HTS superconducting devices, a comparative evaluation of the mechanical and thermal propperties for various insulation materials at cryogenic temperatures is required. Especially, in the process of the property evaluation of the sheet-shaped insulation materials, anisotropy according to the machining direction should be considered because the mechanical and thermal properties are significantly influenced by the sample orientation. In this study, the cryogenic thermal and mechanical properties of various insulation material sheets such as PPLP, Cryoflex, Teflon, and Kapton were determined considering sample orientation. All samples tested at cryogenic temperature showed significantly higher tensile strength as compared with that of room temperature. The ultimate tensile strength at both temperature conditions significantly depended upon the sample orientation. The thermal properties of the insulation materials exhibited a slight difference among samples depending on the orientation: for the PPLP and Cryoflex, the CD orientation showed larger thermal contraction up to 77 K as compared to the MD one. MD samples in PPLP and Cryoflex showed a lower CTE and thermal contraction which made it more promising as an insulation material due to its comparable CTE with HTS CC tapes.

목차

Abstract
 1. INTRODUCTION
 2. EXPERIMENTAL PROCEDURES
  2.1 Samples
  2.2 Mechanical properties measurement
 3. RESULTS AND DISCUSSION
  3.1 Mechanical properties at RT and 77 K
  3.2 Thermal properties at RT and 77 K
 4. CONCLUSION
 ACKNOWLEDGMENT
 REFERENCES

저자

  • Hyung-Seop Shin [ Department of Mechanical Design Engineering, Andong National University, Andong, Kyungbuk, 36729 Korea ] Corresponding author
  • Mark Angelo Diaz [ Department of Mechanical Design Engineering, Andong National University, Andong, Kyungbuk, 36729 Korea ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국초전도저온학회 (구 한국초전도저온공학회) [The Korean Society of Superconductivity and Cryogenics (KSSC)]
  • 설립연도
    1998
  • 분야
    공학>전기공학
  • 소개
    21세기 핵심기술인 초전도공학과 저온공학분야의 기술 수준을 향상시키고, 선진 외국의 관련 학회와의 국제 교류 뿐만 아니라 이 분야에서 산.학.연의 학술활동 및 기술교류의 구심점으로의 그 역할을 성실히 수행하고자 한다.

간행물

  • 간행물명
    한국초전도·저온논문지 (구 한국초전도저온공학회논문지) [Progress in Superconductivity and Cryogenics]
  • 간기
    계간
  • pISSN
    1229-3008
  • eISSN
    2287-6251
  • 수록기간
    1999~2026
  • 등재여부
    KCI 등재,SCOPUS
  • 십진분류
    KDC 427 DDC 537

이 권호 내 다른 논문 / 한국초전도·저온논문지 (구 한국초전도저온공학회논문지) Vol.19 No.2

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장