Structural bracing concept equipped with a new and efficient friction based energy dissipation device is referred to Friction Slip Brace (FSB) where the behavior of the brace components is elastic until the axial resistant force in the brace exceeds the friction force developed at the frictional interface of the device. In this study, the FSB concept is modified and new type of hybrid energy dissipation device, the Active Friction Slip Braces (AFSB), is described. The FSB is by far improved in the AFSB by inclusion of an active clamping mechanism on the friction interface. The clamping action regulated by the developed algorithm is altered during the response of the building. The results indicate that the action of dissipating vibrational energy in the AFSB impacts on the response at later cycles by keeping the drift amplitudes at much lower levels, revealing overshooting problem due to its early slippage. Providing predetermined constant incremental strengths to the building by AFSB members improves response by reducing drift amplitudes and base shear under small and medium amplitude ground accelerations. However, early slippage of AFSB members cause overshooting of the response compared to FSB under large amplitude ground excitation. The operational algorithm of the AFSB members may be modified to prevent it.
한국어
가새가 마찰면을 통해 에너지를 소산시키는 마찰가새(FSB)는 마찰력이 가새의 축저항력을 초과하기 전까지 탄성거동을 한다. 본 연구는 이런 FSB 거동을 바꾼 하이브리드 에너지 소산장치인 능동조임마찰가새(AFSB)를 제안한다. FSB는 마찰면에 능동적으로 조임력을 가하면 지진동을 보다 효율적으로 제어할 수 있는 AFSB로 변한다. 조임력은 컴퓨터 프로그램의 알고리즘을 통해 변동하며 제어된다. 해석결과에 의하면 AFSB는 FSB에 비해 효과적으로 에너지를 소산시켜 응답사이클이 지속될 수록 매우 효과적으로 구조물의 변위를 제어해준다. 즉, 논문 서두에 제안된 강도일정증분 알고리즘은 약진 및 중진의 지진동에 변위와 밑면전단력을 효과적으로 제어함을 확인하였다. 강진의 경우에 AFSB는 응답초기부터 미끄러지는 특성으로 인해 오버슈팅이 발생하여 이를 극복하기위해 최대변위를 제한하도록 알고리즘을 수정하고 결과를 확인하였다.
목차
Abstract 1. 서론 2. 연구의 목적 3. AFSB의 응답특성 3.1 AFSB의 작동 알고리즘 및 설계변수 3.2 해법 도출 3.3 조화기진을 받는 단자유계의 해석 및 결과 3.4 지진동에 대한 제어 해석 4. 결론 REFERENCES
대한건축학회지회연합회 [The Regional Association of Architectural Institute of Korea]
설립연도
2000
분야
공학>건축공학
소개
본회는 건축에 관한 학술․ 예술․ 기술을 연구 연마하는 지회회원들의 입지향상과 회원상호간의 친목도모와 함께 건축 문화창달에 기여함을 목적으로 한다.
목적을 달성하기 위하여 다음의 사업을 한다.
1. 지회회원의 입지향상과 친목도모
2. 건축에 관한 조사․연구지도 및 이에 관련된 사업
3. 회지, 논문집, 연구보고서 기타 건축에 관한 도서의 간행
4. 건축에 관한 강습회․강연회․간담회․전람회․견학회 등의 개최
5. 건축에 관한 계획, 감독, 기술검토에 대한 국가공공기관 기타의뢰에 관한 사항
6. 국내외 관계 제 학회와의 교류 및 회의참석
7. 기타 본회 목적달성에 필요한 사업
간행물
간행물명
대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]