Earticle

현재 위치 Home

A Study on Development of Dry Floor Heating System for Applying to Apartment Buildings of Korea

첫 페이지 보기
  • 발행기관
    보안공학연구지원센터(IJSH) 바로가기
  • 간행물
    International Journal of Smart Home 바로가기
  • 통권
    Vol.10 No.10 (2016.10)바로가기
  • 페이지
    pp.95-108
  • 저자
    Yun-Chul Choi, Hung-Chan Jeon
  • 언어
    영어(ENG)
  • URL
    https://www.earticle.net/Article/A288563

※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

원문정보

초록

영어
In this study, a kind of dry floor element (dry heat storage floor heating block) was developed for applying it to some kinds of residential buildings in Korea and the applicability of the element to some thermal environments and apartment buildings was evaluated. In the aspect of thermal environments, the heat sinking and recuperation capacities of the existing wet floor system and the dry one for which a dry heat storage floor heating block is applied were compared. And the applicability of the block to apartment buildings was evaluated by analyzing the strength and the floor impact noise levels. As the results from a thermal environment analysis, it was analyzed that the heat sinking capacity of a dry floor structure which applies a dry heat storage floor heating block is inferior to a wet floor structure by a little, but the heat sinking capacity of a dry floor structure is higher than that of a wet one. In addition, since the average strain and the residual one were 0.21mm and 0.13mm respectively and the lightweight and heavyweight floor impact noise levels were 39dB and 54dB respectively as the results from a local compression test, it was analyzed that the dry floor structure satisfies the Korean Industrial Standards (KS).

목차

Abstract
 1. Introduction
  1.1. Background and Purpose of Study
  1.2. Scope and Method of Study
 2. Theoretical Reviews
  2.1. Wet Floor Structure (Standard Floor Structure)
  2.2. Dry Floor Heating System
 3. Development of Dry Heat Storage Floor Element
  3.1. Overview of Floor Heating Blocks
  3.2. Shape and Composition of Floor Heating Block
 4. Thermal Environment Evaluation
  4.1. Composition of Specimen
  4.2. Analysis Results of Floor Surface Temperature
 5. Evaluation of Strengths and Floor Impact Noise Levels
  5.1. Local Compression Test Results
  5.2. Floor Impact Noise Test Results
 6. Conclusion
 References

저자

  • Yun-Chul Choi [ Department of Building Equipment & Fire Protection System, Chungwoon University, Incheon, Korea ]
  • Hung-Chan Jeon [ Department of Architectural Engineering, Suwon University, Hwaseong, Korea ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    보안공학연구지원센터(IJSH) [Science & Engineering Research Support Center, Republic of Korea(IJSH)]
  • 설립연도
    2006
  • 분야
    공학>컴퓨터학
  • 소개
    1. 보안공학에 대한 각종 조사 및 연구 2. 보안공학에 대한 응용기술 연구 및 발표 3. 보안공학에 관한 각종 학술 발표회 및 전시회 개최 4. 보안공학 기술의 상호 협조 및 정보교환 5. 보안공학에 관한 표준화 사업 및 규격의 제정 6. 보안공학에 관한 산학연 협동의 증진 7. 국제적 학술 교류 및 기술 협력 8. 보안공학에 관한 논문지 발간 9. 기타 본 회 목적 달성에 필요한 사업

간행물

  • 간행물명
    International Journal of Smart Home
  • 간기
    격월간
  • pISSN
    1975-4094
  • 수록기간
    2008~2016
  • 십진분류
    KDC 505 DDC 605

이 권호 내 다른 논문 / International Journal of Smart Home Vol.10 No.10

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장