Earticle

현재 위치 Home

기술

유입ㆍ유출구가 일직선상인 C형 스트레이너 개발을 위한 유동특성 비교
Comparison of Flow Characteristics for the Development of a C-Type Strainer with Its Inlet and Outlet on a Straight Line

첫 페이지 보기
  • 발행기관
    한국디지털정책학회 바로가기
  • 간행물
    디지털융복합연구 KCI 등재 바로가기
  • 통권
    제14권 제11호 (2016.11)바로가기
  • 페이지
    pp.257-265
  • 저자
    신병균, 권창희
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A288443

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
The purpose of this study was to develop a strainer that could protect a flow system by blocking the introduction of foreign substances into the pipe of industrial or architectural facilities. Strainers are installed at the front tip of valves, machines, or pumps in the piping line of clean water, oil, or gas. There are Y-type, U-type, and T-type strainers. The study identified problems with the Y-type strainers, develop a "C-type strainer with its inlet and outlet on a straight line" as a more improved new model, and compared them in functions in a full-scale strainer test. The study conducted a full-scale strainer test according to four situations at the flow laboratory of Korea Research Institute of Standards and Science by using the old Y-type strainer and C-type strainer 50A. The test results show that the C-type strainer had a higher capacity coefficient(Kv) than the Y-type one, recording 74.9% when there was no screen, 54.5% when there were no foreign substances in the screen, 54.2% when there was a 15% accumulation of foreign substances, and 52.4% when there was a 30% accumulation of foreign substances. The investigator conducted a test only with the 50A type due to the limitations of life-size strainers, but the results demonstrate that the C-type strainer had better flow characteristics than the Y-type one.
한국어
본 연구의 목적은 산업설비나 건축설비의 배관에서 불순물 유입을 막아 유동 시스템을 보호할 수 있는 스 트레이너를 개발하기 위함에 있다. 스트레이너는 청수 또는 기름, 가스가 유입되는 배관라인의 밸브, 기기, 펌프 전 단에 설치되는 장치로 형태에 따라 Y형, U형, T형이 있다. 본 연구에서는 Y형 스트레이너의 문제점을 파악하고 그 보다 개선된 새로운 모델 “유입․유출구가 일직선상에 있는 C형 스트레이너”를 개발하여 실물 시험을 통해 그 성능을 비교하였다. 시험은 기존 Y형과 C형 스트레이너 50A 실물을 한국표준과학연구원(KRISS) 유동실험실에서 4가지 상 황별 실물시험으로 유동특성을 고찰하였다. 실험결과 C형 스트레이너가 Y형 보다 여과망이 없을 때는 74.9%, 여과 망에 불순물이 없을 때는 54.5%, 불순물이 15% 쌓였을 때는 54.2%, 불순물이 30% 쌓였을 때는 52.4%가 용량계수 (Kv)값이 높았다. 실물제작의 한계로 50A 한 종류만 시험했지만 결과로 볼 때 Y형보다 C형 스트레이너가 유동특성 이 우수한 것으로 입증되어 향후 건축, 산업현장에서 유용하게 사용될 것으로 판단되었다.

목차

요약
 Abstract
 1. 서론
 2. C형 스트레이너의 설계
  2.1 설계요건
  2.2 본체의 설계
  2.3 여과망의 설계
  2.4 여과망의 압력손실
 3. Y형과 C형 스트레이너의 유동 특성
  3.1 Y형 스트레이너 개요
  3.2 C형 스트레이너 개요
  3.3 C형 스트레이너 특징
 4. Y형, C형 스트레이너 성능비교 시험
  4.1 시험방법
  4.2 실물 시험결과
 5. 결론
 REFERENCES

키워드

스트레이너 유동시스템 성능시험 유동해석 유동특성 Strainer Flow System Performance Tests Flow Interpretations Flow Characteristics

저자

  • 신병균 [ Byung-kyun Shin | 한세대학교 대학원 U-City IT융합 도시정책학과 박사과정 ]
  • 권창희 [ Chang-Hee Kwon | 한세대학교 대학원 U-City IT융합 도시정책학과 교수 ] Corresponding author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국디지털정책학회 [The Society of Digital Policy & Management]
  • 설립연도
    2003
  • 분야
    복합학>과학기술학
  • 소개
    디지털기술 및 산업정책, 디지털경제, 관련 산업의 연구, 전자정부, 디지털정치에 관한 제도적, 정책적 연구, 디지털경영, 전자상거래, e-비즈니스에 관한 실용적 연구, 학술연구지 발간 및 학술대회 개최 등을 통하여 디지털경제 및 디지털경영에 관련되는 국가정책 분야의 연구 및 교류를 촉진하고 국가 및 기업 정보화와 디지털산업의 발전에 공헌한다.

간행물

  • 간행물명
    디지털융복합연구 [Journal of Digital Convergence]
  • 간기
    계간
  • pISSN
    2713-6434
  • eISSN
    2713-6442
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재후보
  • 십진분류
    KDC 569 DDC 620

이 권호 내 다른 논문 / 디지털융복합연구 제14권 제11호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장