건물에서의 냉난방 순환펌프의 차압제어 성능개선에 관한 연구
The Study on Improvement of Performance of Differential Pressure Control of a Circulating Pump for Cooling and Heating in a Building
In this study, the driving features and problems of differential pressure control at the inlet and outlet of a pump by using actual measurement at the site and a simulation (Flowmaster V7) were analyzed. Besides, based on the results, the algorithm for variable differential pressure control was established. To sum up the results of the study, they are as follows. 1) As a result of actual measurement at the site, it was judged that applying differential pressure control to a circulating pump for cooling and heating was appropriate. However, it was shown that excessive heating was made due to absence of proper standards for differential pressure. 2) As a result of a simulation, it was found that differential temperature control turned out to be more effective approximately 17.41% on average compared to differential pressure control in terms of energy consumption. However, it showed unstable driving features compared to differential pressure control. 3) Finally, the algorithm for variable differential pressure control of the standard differential pressure using differential temperature was established. As a result of a simulation, it showed energy performance with the same level as differential temperature control. Besides, unlike differential temperature control, it showed overall stable driving features.
한국어
본 연구에서는 현장실측 및 시뮬레이션(Flowmaster V7)을 이용하여 펌프 전후단 차압제어의 구동특성 및 문제점을 분석하였다. 또한, 그 결과를 바탕으로 기준차압 가변형 차압제어 알고리즘을 구축하였다. 본 연구의 결과를 정리하면 다음과 같다. 1) 현장실측 결과 냉·난방 순환펌프에 차압제어를 적용하는 것이 적합한 것으로 판단되었다. 하지만, 적절한 차압기준의 부재로 과도하게 난방이 이루어지는 것으로 나타났다. 2) 시뮬레이션 결과 차온제어가 차압제어에 비해 에너지 소비측면에서 평균 약 17.41% 효과적인 것으로 나타났다. 하지만, 차압제어에 비해 불안정한 구동특성을 보였다. 3) 최종적으로 차온을 이용한 기준차압 가변형 차압제어 알고리즘을 구축하였다. 시뮬레이션 결과 차온제어와 동일한 수준의 에너지 성능을 나타냈다. 또한, 차온제어와 달리 전체적으로 안정적인 구동특성을 보였다.
목차
Abstract 1. 연구의 배경 및 목적 2. 이론적 고찰 2.1 냉난방 순환펌프 2.2 Flowmaster V7 3. 현장실측을 통한 차압제어의 특성분석 3.1 현장실측 개요 3.2 실측결과 및 분석 4. 시뮬레이션을 통한 성능 개선방안 검토 4.1 시뮬레이션 개요 4.2 시뮬레이션 결과분석 5. 기준차압 가변형 차압제어 성능검토 5.1 알고리즘 구축 5.2 시뮬레이션을 통한 성능검토 6. 결론 REFERENCES
키워드
순환펌프플로우마스터차압제어차온제어Circulating PumpFlowmaster V7Differential Pressure ControlDifferential Temperature Control
대한건축학회지회연합회 [The Regional Association of Architectural Institute of Korea]
설립연도
2000
분야
공학>건축공학
소개
본회는 건축에 관한 학술․ 예술․ 기술을 연구 연마하는 지회회원들의 입지향상과 회원상호간의 친목도모와 함께 건축 문화창달에 기여함을 목적으로 한다.
목적을 달성하기 위하여 다음의 사업을 한다.
1. 지회회원의 입지향상과 친목도모
2. 건축에 관한 조사․연구지도 및 이에 관련된 사업
3. 회지, 논문집, 연구보고서 기타 건축에 관한 도서의 간행
4. 건축에 관한 강습회․강연회․간담회․전람회․견학회 등의 개최
5. 건축에 관한 계획, 감독, 기술검토에 대한 국가공공기관 기타의뢰에 관한 사항
6. 국내외 관계 제 학회와의 교류 및 회의참석
7. 기타 본회 목적달성에 필요한 사업
간행물
간행물명
대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]