Earticle

현재 위치 Home

고층 건물의 최상층에 풍력발전시스템을 구축하기 위한 다양한 유입구 형상에 대한 연구
Study on Shapes of Various Inlets to Wind Power Generation System at the Highest Floor in High-rise Buildings

첫 페이지 보기
  • 발행기관
    대한건축학회지회연합회 바로가기
  • 간행물
    대한건축학회연합논문집 KCI 등재 바로가기
  • 통권
    제18권 제4호 통권 74호 (2016.08)바로가기
  • 페이지
    pp.115-122
  • 저자
    형원길, 유기표
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A284585

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
In recent years, the demands of high-rise buildings have increased considerably. Since these buildings consume much energy, it is an important issue to save energy in the buildings. A variety of technologies have been studied to apply new and renewal energy to high-rise buildings. The integration of wind power generation and building technologies into building-integrated wind power (BIWP) has been attempted in various ways in recent years. It is essential to install the right type of opening in order to create a wind power generation system at the highest part of a high-rise building; thus, changes in wind velocity through various types of openings have been studied. In this paper, an opening installed for a wind power generator at the highest floor of a high-rise building was set to three shapes: a rectangle, a circle, and a rhombus. A wind velocity test was conducted according to changes in the areas of the wind inlet and wind outlet at the opening. The test results showed that the distribution of the inner air current shape differed according to the shape of the opening. A rhombus opening shape showed the most efficient air current distribution.
한국어
최근 고층건물에 대한 수요가 급증하고 있다. 이러한 고층건물은 에너지를 많이 소비하기 때문에 고층 건물에서의 에너지 절약은 매우 중요한 문제이다. 고층건물에 신재생에너지를 적용하기 위한 다양한 기술들이 연구되고 있다. 최근 풍력발전을 건축물에 적용하여 풍력발전과 건설기술을 통합하는 건축물 통합형 풍력발전(building integrated wind power, biwp)이 다양하게 시도되고 있다. 고층건물의 최상부에 풍력발전시스템을 구축하기 위하여 일정한 개구부의 설치가 필수적이다. 개구부의 다양한 형태별 풍속변화에 대해서 알아보았다. 본 논문에서는 고층건물의 최상층에 풍력발전기를 설치를 위한 개구부의 형태를 직사각형, 원형, 마름모 3개의 형태로 하였다. 개구부의 바람이 유입되는 유입구와 바람이 흘러가는 유출구의 면적변화에 따른 풍속실험을 실시하였다. 실험결과 개구부의 형태에 따라 내부의 기류형태가 다르게 분포하였다. 마름모 개구부 형태가 가장 효율적인 기류분포를 하고 있었다.

목차

Abstract
 1. 서론
 2. 풍동실험
  2.1 실험모형
  2.2 풍동실험
 3. 실험결과 및 고찰
  3.1 면적비별 풍속변화
  3.2 면적비별 난류강도변화
 4. 결론
 REFERENCES

키워드

고층건물 풍동실험 건물통합형풍력발전기 건물통합 풍력발전 High-rise Buildings Wind Tunnel Test Building-integrated Wind Power Building-integrate Wind Power

저자

  • 형원길 [ Hyung, Wong-Gil | 영남대학교 건축공학과 부교수, 공학박사 ]
  • 유기표 [ You, Ki-Pyo | 전북대학교 건축공학과 부교수, 공학박사 ] 교신저자

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    대한건축학회지회연합회 [The Regional Association of Architectural Institute of Korea]
  • 설립연도
    2000
  • 분야
    공학>건축공학
  • 소개
    본회는 건축에 관한 학술․ 예술․ 기술을 연구 연마하는 지회회원들의 입지향상과 회원상호간의 친목도모와 함께 건축 문화창달에 기여함을 목적으로 한다. 목적을 달성하기 위하여 다음의 사업을 한다. 1. 지회회원의 입지향상과 친목도모 2. 건축에 관한 조사․연구지도 및 이에 관련된 사업 3. 회지, 논문집, 연구보고서 기타 건축에 관한 도서의 간행 4. 건축에 관한 강습회․강연회․간담회․전람회․견학회 등의 개최 5. 건축에 관한 계획, 감독, 기술검토에 대한 국가공공기관 기타의뢰에 관한 사항 6. 국내외 관계 제 학회와의 교류 및 회의참석 7. 기타 본회 목적달성에 필요한 사업

간행물

  • 간행물명
    대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]
  • 간기
    격월간
  • pISSN
    1229-5752
  • 수록기간
    1999~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 540 DDC 690

이 권호 내 다른 논문 / 대한건축학회연합논문집 제18권 제4호 통권 74호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장