Earticle

초록

영어

Background: In order to measure neutron energy spectra, the conventional Bonner Sphere Spectrometers (BSS) are widely used. In this spectrometer, several measurements with different size Bonner spheres are required. Operators should, therefore, place these spheres in several times to a measurement point where radiation dose might be relatively high. In order to reduce this effort, novel neutron energy spectrometer using an onion-like single Bonner sphere was proposed in our group. This Bonner sphere has multiple sensitive spherical shell layers in the single sphere. In this spectrometer, a band-shaped thermal neutron detection medium, which consists of a LiF-ZnS mixed powder scintillator sheet and a wavelength-shifting (WLS) fiber readout, was looped to each sphere at equal angular intervals. Amount of LiF neutron converter is reduced near polar region, where the band-shaped detectors are concentrated, in order to uniform the directional sensitivity. The LiF-ZnS mixed powder has an advantage of extremely high light yield. However, since it is opaque, scintillation photons cannot be collect uniformly. This type of detector shows no characteristic shape in the pulse height spectrum. Subsequently, it is diffcult to set the pulse height discrimination level. This issue causes sensitivity fluctuation due to gain instability of photodetectors and/or electric modules. Materials and Methods: In order to solve this problem, we propose to replace the LiF-ZnS mixed powder into a flexible and Transparent RUbber SheeT type LiCaAlF6 (TRUST LiCAF) scintillator. TRUST LiCAF scintillator can show a peak shape corresponding to neutron absorption events in the pulse height spectrum. Results and Discussion: We fabricated the prototype detector with five sensitive layers using TRUST LiCAF scintillator and conducted basic experiments to evaluate the directional uniformity of the sensitivity. Conclusion: The fabricated detector shows excellent directional uniformity of the neutron sensitivity.

목차

ABSTRACT
 Introduction
 Materials and Methods
  1. Details of the fabricated neutron spectrometer
  2. Experimental setup
 Results and Discussion
 Conclusion
 References

키워드

저자

• Tomoaki Mizukoshi [ Nagoya University, Nagoya ] Corresponding author
• Kenichi Watanabe [ Nagoya University, Nagoya ]
• Atsushi Yamazaki [ Nagoya University, Nagoya ]
• Akira Uritan [ Nagoya University, Nagoya ]
• Tetsuo Iguchi [ Mitsubishi Heavy Industries Ltd., Kobe, Japan ]
• Takashi Muramatsu [ Mitsubishi Heavy Industries Ltd., Kobe, Japan ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  방사선방어학회지 [Journal of Radiation Protection and Research]

• 간기

  계간

• pISSN

  2508-1888

• 수록기간

  1976~2026

• 등재여부

  KCI 등재,SCOPUS

• 십진분류

  KDC 559 DDC 629