Earticle

현재 위치 Home

백토안료의 전통제법 중 아교수 영향에 관한 연구
The Effect of Glue Solution on Manufacturing of White Clay Pigment

첫 페이지 보기
  • 발행기관
    한국문화유산보존과학회(구 한국문화재보존과학회) 바로가기
  • 간행물
    보존과학회지 KCI 등재 바로가기
  • 통권
    제32권 제3호 (2016.09)바로가기
  • 페이지
    pp.417-423
  • 저자
    강영석, 정혜영, 고인희
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A283541

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
The effect of the glue solution were investigated in the grinding and elutriation process for manufacturing of White clay pigment. In grinding process, glue solution decreased the production of a too fine powder and enhanced the degree of sorting of ground pigments. The grinding performance and limit are generally influenced by the frictional force. Therefore, the friction force was measured in accordance with the grinding conditions. As a result of measuring a friction force, when using glue solution it showed the lowest friction. Finally, the application of glue solution in grinding process is believed to enhance the degree of sorting of ground pigments by reducing frictional force. In elutriation process, the application of glue solution enabled the screening of larger particles in the same conditions by reducing the sedimentation velocity. This result is due to increase in the viscosity of the glue solution according to glue concentration. As a result, the application of glue solution in elutriation process is though to enlarges the range of the selectable particle size and to enable the segmentation of the particles.
한국어
백토안료의 제조 공정 중 분쇄 및 수비단계에서 아교수를 적용하고 이에 따른 영향을 분석하였다. 분쇄 공정에서 아교수를 적용한 경우, 일반 증류수를 사용했을 때보다 미분의 생성량이 감소하고 분급도가 향상되는 것으로 나타났다. 일반적으로 분쇄 성능 및 분쇄 한계에는 마찰력이 많은 영향을 미친다. 따라서 분쇄 조건에 따른 마찰력을 측정한 결과, 아교수를 적용한 경우 상대적으로 마찰력이 감소하는 것으로 확인되었다. 결국 분쇄 공정에서 아교수를 사용하는 것은 마찰력을 감소시켜 결과적으로 분급도를 향상시키기 위한 것으로 판단된다. 안료 제조 공정 중 수비단계에서 아교수를 적용한 결과, 아교수 적용 시 동일한 조건에서 보다 큰 입도의 입자를 수비해 내는 것이 가능한 것으로 나타났다. 이와 같은 결과는 수비액으로 아교수를 사용한 경우, 아교의 농도가 증가함에 따라 수비액의 점도가 증가하여 입자의 침강속 도가 감소하기 때문인 것으로 확인되었다. 결국 수비 공정에서 아교수를 사용한 것은 수비액의 점도를 증가시켜 수비를 통해 선별할 수 있는 입도의 범위를 확대하고, 보다 세밀한 입도 구간으로 입자를 선별하기 위한 것으로 판단된다.

목차

초록
 ABSTRACT
 1. 서론
 2. 실험재료 및 방법
  2.1. 실험재료
  2.2. 실험방법
 3. 연구결과 및 고찰
  3.1. 분쇄
  3.2. 수비
 4. 결론
 REFERENCES

저자

  • 강영석 [ Yeong Seok Kang | 국립문화재연구소 복원기술연구실 ]
  • 정혜영 [ Hye Young Jeong | 국립문화재연구소 복원기술연구실 ] Corresponding author
  • 고인희 [ In Hee Go | 국립문화재연구소 복원기술연구실 ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국문화유산보존과학회(구 한국문화재보존과학회) [The Korea Society of Conservation Science for Cultural Heritage]
  • 설립연도
    2003
  • 분야
    자연과학>자연과학일반
  • 소개
    본 법인은 문화재 과학적 보존에 관한 제반 학술적 연구 발전 보급을 위하여 문화재 보존기술 개발과 수리 및 복원에 관한 방법을 연구함으로서 문화재의 보존 및 계승에 기여함을 그 목적으로 한다.

간행물

  • 간행물명
    보존과학회지 [Journal of Conservation Science]
  • 간기
    연5회
  • pISSN
    1225-5459
  • eISSN
    2287-9781
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 602 DDC 700

이 권호 내 다른 논문 / 보존과학회지 제32권 제3호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장