Earticle

초록

영어

A novel technique to generate an arbitrary chirped waveform by harnessing features of Lithium Niobate Mach-Zehnder analog intensity Modulator is suggested and verified by mathematical analysis. The most important application of chirped microwave waveform is that, it improves the range- resolution of radar. In the proposed approach, two electrical drive signal of opposite gain is used to modulate light coming out from the continuous-wave (CW) laser in LiNb Mach-Zehnder modulator (MZM). The output of the MZM is chirped optical waveform due to the dependence of the mach-zehnder modulators chirp on the form of signals applied to the drive electrode. In our simple and straight forward method of producing chirped waveform, is basically based on the concept of change in phase at the two arms of Lithium Niobate Mach-Zehnder modulator due to change in refractive index at the respective arms when electric drive voltage is applied. The chirping phenomenon is expressed in terms of an intrinsic chirp parameter of the MZM. The proposed design is simple, easy to implement and cost effective than the previously proposed model of chirped waveform generation uses the MZM and chirped fiber Bragg grating.

목차

Abstract
 1. Introduction
 2. Photonic Microwave Arbitrary Waveform Generation Technique
 3. Experimental Setup
  A. Operating Principle
  B. Mathematical Analysis.
 4. Result and Simulation
 5. Conclusion
 References

키워드

저자

• Akash Srivastav [ Electronics Engineering Department, Indian School of Mines Dhanbad, Jharkhand-826004, India ] Corresponding author
• Sanjeev Kumar Raghuwanshi [ Electronics Engineering Department, Indian School of Mines Dhanbad, Jharkhand-826004, India ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  International Journal of Signal Processing, Image Processing and Pattern Recognition

• 간기

  격월간

• pISSN

  2005-4254

• 수록기간

  2008~2016

• 십진분류

  KDC 505 DDC 605