Earticle

초록

영어

Trapezoidal mechanisms and swing arm mechanisms in the steering linkages were usually designed separately, and only the steered wheel deflection errors were fixed as the optimization objective. To deal with these design faults, multi-objective optimization model of the steering linkages were developed in this paper. The model considered not only the steered wheel deflection errors but also the unevenness of the steering linkages transmitting ratios. In the model, the optimization variables were the link dimensions of the steering linkages and the optimization was processed in Adams software using SPQ algorithm. The optimization results show that the unevenness of the first axle steering mechanism transmitting ratio reduced from9.7% to 4.9%, the unevenness of the second axle steering mechanism transmitting ratio reduced from3.8% to 2.1%, the maximum deflection error of the first axle right steered wheel reduced 39.3%, the maximum deflection error of the second axle left steered wheel reduced 21.4%, the maximum deflection error of the second axle right steered wheel reduced 48.4%. Benefitting from the unevenness improvement of the steering linkages transmitting ratios, the maximum difference between the bilateral deflection errors of the first axle right steered wheel reduced from1 to 0.5 , the maximum difference between the bilateral deflection errors of the second axle left steered wheel reduced from 4 to 0.8 , the homologous maximum difference of the second axle right steered wheel reduced from 6 to 0.3 . For the handiness, the maximum difference of the bilateral steering forces reduced from1.44Nㆍm to1.1Nㆍm, the maximum difference of the bilateral number of the steering wheel turns reduced from 0.15 to 0.11. For the lemniscate simulations, the difference between the positive and negative amplitude of the yaw angular velocity reduced from1.67 / s to 0.58 / s , the difference between the positive and negative amplitude of the lateral accelerometer reduced from 2 83.3mm/ s2 to 49.6mm/ s2 . Because the unevenness of the steering linkages transmitting ratios was optimized, the steered wheel deflection errors tended to be bilateral symmetry and the vehicle handiness and control stability were both improved.

목차

Abstract
 1. Introduction
 2. Research Subject and Model Coordinates
 3. Steering Linkages Optimization
  3.1. Optimization Variables
  3.2. Objective Function
  3.3. Constrains
  3.4. Optimization Results
 4. Influences of the Steering Linkages Transmitting Ratios on the Vehicle Handiness
 5. Influences of the Steering Linkages Transmitting Ratios on the Vehicle Control Stability
 6. Conclusions
 7. Appendices
 Acknowledgements
 References

키워드

저자

• Gu Yufeng [ Key Laboratory for Highway Construction Technology and Equipment of Ministry of Education, Chang'an University ]
• Dong Fulong [ College of Mechanical Engineering, Anhui Science and Technology University ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  International Journal of Database Theory and Application

• 간기

  격월간

• pISSN

  2005-4270

• 수록기간

  2008~2016

• 십진분류

  KDC 505 DDC 605