Earticle

초록

영어

Metal matrix composites(MMC) can obtain mechanical characteristics of application purposes that a single material is difficult to obtain. Al2 O3/AC8A composites were fabricated by low pressure infiltration process. The purpose is establishing the optimal casting conditions for composite preparation under low pressure. It is known the inorganic binder help infiltration. Therefore Al2O3 fiber preform's optimum sinter temperature is 1160℃, added inorganic binder is mixed binder(SiO2 sol:Al2O3 sol=5:2). And three fibers have been compared (Al2O3 80%/SiO2 20%, Al2O3 80%/SiO2 10% and Al2O3 97%/SiO2 3%). Al2O3/AC8A composites was made by each melting temperatures(650℃, 700℃, 750℃) and wear test was performed about effect of temperatures, kind of fiber, matrix and composites, aging time. Wear test is Ball on disk wear test. The resistance increased with the low melting temperature and Al2O3 80%/SiO2 20% fiber.

목차

Abstract
 1. Introduction
 2. Experimental procedures
 3. Results and discussions
 4. Conclusion
 Acknowledgment
 References

키워드

저자

• S.H. Park [ 박성호 | Department of Shipbuilding & Marine Mechanics, Changwon MoonSung University ]
• G.W. Hwang [ 황규완 | Subdivision of Mechanical Engineering, Kyungnam College of Information & Technolgoy ]
• W. J. Park [ 박원조 | Member, Department of Energy and Mechanical Engineering, Gyeong Sang National University ] Corresponding Author

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  한국기계항공기술학회지(구 한국기계기술학회지) [Journal of the Korean Society of Mechanical and Aviation Technology ]

• 간기

  격월간

• pISSN

  1229-604X

• eISSN

  2508-3805

• 수록기간

  1999~2026

• 등재여부

  KCI 등재

• 십진분류

  KDC 550 DDC 620