Earticle

초록

영어

Background: The scattered photons cause reduction of the contrast of radiographic image and it results in the degradation of the quality of the image. In order to acquire better quality image, an anti-scattering x-ray gird should be equipped in radiography system. Materials and Methods: The X-ray anti-scattering grid of the inclined type based on the hybrid concept for that of parallel and focused type was tested by MCNP code. The MCNPX 2.7.0 was used for the simulation based test. The geometry for the test was based on the IEC 60627 which was an international standard for diagnostic X-ray imaging equipment-Characteristics of general purpose and mammographic anti-scatter grids. Results and Discussion: The performance of grids with four inclined shielding material types was compared with that of the parallel type. The grid with completely tapered type the best performance where there were little performance difference according to the degree of inclination. Conclusion: It was shown that the grid of inclined type had better performance than that of parallel one.

목차

ABSTRACT
 1. INTRODUCTION2
 2. MATERIALS AND METHODS
  2.1 Grid design
  2.2 Simulation design
  2.3 Method of analysis
 3. RESULTS AND DISCUSSION
 4. CONCLUSION
 ACKNOWLEDGEMENT
 REFERENCES

키워드

저자

• Jun Woo Bae [ Ulsan National Institute of Science and Technology, Ulsan, Republic of Korea ]
• Hee Reyoung Kim [ Ulsan National Institute of Science and Technology, Ulsan, Republic of Korea ] Corresponding author

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  방사선방어학회지 [Journal of Radiation Protection and Research]

• 간기

  계간

• pISSN

  2508-1888

• 수록기간

  1976~2026

• 등재여부

  KCI 등재,SCOPUS

• 십진분류

  KDC 559 DDC 629