Earticle

현재 위치 Home

압축을 받는 접합된 알루미늄 폼의 역학적 거동에 관한 해석 및 검증
Analysis and Verification on Mechanical Behavior of Bonded Aluminum Foam under Compression

첫 페이지 보기
  • 발행기관
    한국기계항공기술학회(구 한국기계기술학회) 바로가기
  • 간행물
    한국기계항공기술학회 학술대회논문집(구 한국기계기술학회 학술대회논문집) 바로가기
  • 통권
    2015년도 한국기계기술학회 추계학술발표회 논문집 (2015.11)바로가기
  • 페이지
    pp.90-91
  • 저자
    윤동환, 조재웅
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A276404

원문정보

초록

영어
This study investigates the mechanical behavior at the compression of bonded aluminum foam. Four kinds of specimen thicknesses are 25, 50, 75 and 100mm. These aluminum foams are compressed with the speed of 5mm/min. The reaction forces in cases of 25, 50, 75 and 100mm are 2510, 5080, 7700 and 10400N respectively. The equivalent stresses are 0.96, 1.00, 1.02 and 1.03MPa respectively. These analysis results are verified by comparing with the experimental results. The results of this study can be contributed to the safe design of structure.

목차

Abstract
 1. 서론
 2. 해석 및 실험조건
 3. 해석 및 실험결과
 4. 결론
 후기
 References

저자

  • 윤동환 [ Dong-Hwan Yoon | Department of Mechanical & Automotive Engineering, Kongju National University ]
  • 조재웅 [ Jae-Ung Cho | Professor, Division of Mechanical & Automotive Engineering, Kongju National University ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국기계항공기술학회(구 한국기계기술학회) [Korean Society of Mechanical Technology]
  • 설립연도
    1999
  • 분야
    공학>기계공학
  • 소개
    기계 관련 산업 분야에 관한 학술과 현장 적용 기술을 연구하고 교류하며, 이에 관련된 학문과 기술 발전 및 보급에 기여함으로써 과학과 기술의 진흥에 이바지함을 그 목적으로 한다.

간행물

  • 간행물명
    한국기계항공기술학회 학술대회논문집(구 한국기계기술학회 학술대회논문집) [Proceedings of KSMT Annual Meeting]
  • 간기
    부정기
  • 수록기간
    2000~2024
  • 십진분류
    KDC 550 DDC 620

이 권호 내 다른 논문 / 한국기계항공기술학회 학술대회논문집(구 한국기계기술학회 학술대회논문집) 2015년도 한국기계기술학회 추계학술발표회 논문집

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장