Earticle

초록

영어

Polishing technology is a final surface finishing process. The main aim is the removal of the machining marks to make the surface bright and clean. Polishing is often difficult to realize automatic mechanical polishing due to the polishing quality requirements and workpiece shape. Aiming at the problem, an automatic polishing technology has been proposed. In the paper, a new polishing path determining a method has been proposed. With this path, the abrasive properties have been studied. Firstly, the abrasive has been selected according to the surface roughness experiment; then, the detailed parameters of processing have been researched. The experimental results show that there is a reasonable grain size meeting the roughness requirement of the workpiece surface with relatively larger abrasive grain size. Besides, it can also be concluded that the roughness of the workpiece surface and the path planning of the abrasive and the processing parameters have high relationship, and only the full consideration of all the parameters can help to improve the processing efficiency with the low cost.

목차

Abstract
 1. Introduction
 2. A New Polishing Method
  2.1 The Basic Cutting Tool Path Planning Method
  2.2 The New Cutting Tool Path Planning Method
 3. Verification
  3.1. Polishing Process
  3.2. The Polishing Experiment
  3.3. Effect of Grain Size on Polishing Performance
 4. Conclusion
 References

키워드

저자

• Zhang Su [ College of Mechanical and Electrical Engineering, Agriculture University of Hebei, Baoding, Hebei, China ]
• Zheng Ying [ College of Mechanical and Electrical Engineering, Agriculture University of Hebei, Baoding, Hebei, China ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  International Journal of Smart Home

• 간기

  격월간

• pISSN

  1975-4094

• 수록기간

  2008~2016

• 십진분류

  KDC 505 DDC 605