Wang beiyi,, Yu xiaoyang, He baohua, Cai yingfu, Zhang jixun, Sun Xiaoming
언어
영어(ENG)
URL
https://www.earticle.net/Article/A270196
※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.
원문정보
초록
영어
In order to establish the 3D Temperature Field based on structure light 3D measurement and cross-correlation registration. Infrared/Visible camera calibration method and heterologous images registration method were studied. First, according to infrared camera’s characteristics, the selection of calibration templates have been studied and the calibration of the infrared camera has been accomplished on the basis of planar calibration method; then, we simplified the two-step method based on the mature principle of structure light measurement; and the visible camera was calibrated; finally, use calibrated visible cameras to form structured light measurement system, and register the infrared image and visible image in the geometrical position. Experimental results show that: the relative error of measurement system is less than 0.3%;infrared and visible image’s alignment error in geometrical position is 0.0015 mm. and measurement systems have good reconstruction results for plane and curved ,and cross-correlation method has a good effect for heterrologous images registration.
목차
Abstract 1. Introduction 2. Infrared Cameras and Visible Camera Calibration Theory and Experiment 2.1 Principle of Visible Camera Calibration 2.2 Infrared Camera Calibration Principle 3. 3D Measurement Experiments after Visible Camera Calibration 3.1 Plane Measurement 3.2 Surface Measurement 4. The Experimental Infrared Camera Calibration after Registration 5. Conclusion References
Wang beiyi, [ The higher educational key laboratory for Measuring & Control Technology and Instrumentations of Heilongjiang province, Harbin University of Science and Technology, Harbin 150080, China ]
Yu xiaoyang [ The higher educational key laboratory for Measuring & Control Technology and Instrumentations of Heilongjiang province, Harbin University of Science and Technology, Harbin 150080, China ]
Corresponding author
He baohua [ The higher educational key laboratory for Measuring & Control Technology and Instrumentations of Heilongjiang province, Harbin University of Science and Technology, Harbin 150080, China ]
Cai yingfu [ The higher educational key laboratory for Measuring & Control Technology and Instrumentations of Heilongjiang province, Harbin University of Science and Technology, Harbin 150080, China ]
Zhang jixun [ The higher educational key laboratory for Measuring & Control Technology and Instrumentations of Heilongjiang province, Harbin University of Science and Technology, Harbin 150080, China ]
Sun Xiaoming [ The higher educational key laboratory for Measuring & Control Technology and Instrumentations of Heilongjiang province, Harbin University of Science and Technology, Harbin 150080, China ]
보안공학연구지원센터(IJUNESST) [Science & Engineering Research Support Center, Republic of Korea(IJUNESST)]
설립연도
2006
분야
공학>컴퓨터학
소개
1. 보안공학에 대한 각종 조사 및 연구
2. 보안공학에 대한 응용기술 연구 및 발표
3. 보안공학에 관한 각종 학술 발표회 및 전시회 개최
4. 보안공학 기술의 상호 협조 및 정보교환
5. 보안공학에 관한 표준화 사업 및 규격의 제정
6. 보안공학에 관한 산학연 협동의 증진
7. 국제적 학술 교류 및 기술 협력
8. 보안공학에 관한 논문지 발간
9. 기타 본 회 목적 달성에 필요한 사업
간행물
간행물명
International Journal of u- and e- Service, Science and Technology
간기
격월간
pISSN
2005-4246
수록기간
2008~2016
십진분류
KDC 505DDC 605
이 권호 내 다른 논문 / International Journal of u- and e- Service, Science and Technology Vol.8 No.11