Earticle

초록

영어

Based on the concentrated parameters theory, a 7-freedom coupled vibration dynamic model of the spiral bevel gear transmission system is established, which includes transmission error, time-varying mesh stiffness and the tooth backlash clearance. In the model, the axial vibration, the torsion oscillation of the gear pair aroused by tooth meshing force and the lateral oscillations resulting from flexional deformation of the gear shaft are taken into account. The mesh stiffness fluctuation is developed as 5-order Fourier series and the tooth backlash clearance is fitted by 7-order polynomial function. Through the Gear method, the dynamic response of the system is obtained, and the vibration characteristics are analyzed.

목차

Abstract
 1. Introduction
 2. Establishment of Nonlinear Dynamic Differential Equations of the Spiral Bevel Gear System
 3. Stiffness of Gear System
 4. Numerical Calculation of Mechanical Equation of Gear System
 5. Conclusion
 References

키워드

저자

• Nie Junfeng [ School of Mechanical Engineering,Harbin University of Science and TechnologyHeilongjiang, P.R. China, 150080 ]
• Yu Guangbin [ School of Mechanical Engineering,Harbin University of Science and TechnologyHeilongjiang, P.R. China, 150080 ] Corresponding Author
• Song Ye [ School of Mechanical Engineering,Harbin University of Science and TechnologyHeilongjiang, P.R. China, 150080 ]
• Qu Zhigang [ School of Mechanical Engineering,Harbin University of Science and TechnologyHeilongjiang, P.R. China, 150080 ]
• Zheng Minli [ School of Mechanical Engineering,Harbin University of Science and TechnologyHeilongjiang, P.R. China, 150080 ]
• Zhao Xingfu [ School of Mechanical Engineering,Harbin University of Science and TechnologyHeilongjiang, P.R. China, 150080 ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  International Journal of Multimedia and Ubiquitous Engineering

• 간기

  월간

• pISSN

  1975-0080

• 수록기간

  2008~2016

• 등재여부

  SCOPUS

• 십진분류

  KDC 505 DDC 605