The modular multilevel converter (MMC) has been widely researched in the past decade for its superior performance in high voltage high power applications. However, applying MMC into electric motor drive systems is a intrinsically challenging problem because the capacitor voltages fluctuate in a wide range when the converter works at low output frequencies. A novel model predictive vector control (MPVC) scheme is presented to ensure the output phase currents’ quality of MMC for entire frequency range. In this scheme, model predictive control (MPC) is adopted to track the phase currents’ reference values and balance the capacitor voltages as far as possible. By replacing the conventional inner current control loops and pulse width modulation (PWM) module with MPC controllers, the vector control oriented by rotor flux is constructed to meet the requirements of drive systems. Simulations of a MMC drive with an induction motor are carried out using the Matlab/Simulink. The simulation waveforms demonstrate that the drive system achieves satisfied steady and dynamic performance.
목차
Abstract 1. Introduction 2. System Structure and Operating Principles 3. Mathematical Model of an MMC 3.1. Continuous Mathematical Model 3.2. Discrete Mathematical Model for MPC Strategy 4. Design of Control System 4.1. MPC Strategy for MMC 4.2. Model Predictive Vector Control 5. Performance Evaluation 5.1. Steady-State Performance 5.2. Dynamic-State Performance 6. Conclusion References
키워드
Modular multilevel converterModel predictive controlVector controlDrive system
저자
Peng Dai [ School of Information and Electrical Engineering, China University of Mining and Technology, Xuzhou, Jiangsu 221116, China ]
Zheng Gong [ School of Information and Electrical Engineering, China University of Mining and Technology, Xuzhou, Jiangsu 221116, China ]
Guosheng Guo [ School of Information and Electrical Engineering, China University of Mining and Technology, Xuzhou, Jiangsu 221116, China ]
보안공학연구지원센터(IJCA) [Science & Engineering Research Support Center, Republic of Korea(IJCA)]
설립연도
2006
분야
공학>컴퓨터학
소개
1. 보안공학에 대한 각종 조사 및 연구
2. 보안공학에 대한 응용기술 연구 및 발표
3. 보안공학에 관한 각종 학술 발표회 및 전시회 개최
4. 보안공학 기술의 상호 협조 및 정보교환
5. 보안공학에 관한 표준화 사업 및 규격의 제정
6. 보안공학에 관한 산학연 협동의 증진
7. 국제적 학술 교류 및 기술 협력
8. 보안공학에 관한 논문지 발간
9. 기타 본 회 목적 달성에 필요한 사업
간행물
간행물명
International Journal of Control and Automation
간기
월간
pISSN
2005-4297
수록기간
2008~2016
십진분류
KDC 505DDC 605
이 권호 내 다른 논문 / International Journal of Control and Automation Vol.9 No.1