A Preliminary Study on the Feasibility of Copper Mesh as an Off-Gas Iodine Capturing Medium for Pyroprocessing
파이로프로세싱 배기체 요오드 포집을 위한 구리메쉬 적용 가능성에 대한 기초 연구
Min Ku Jeon, Tae Kyo Lee, Yong Taek Choi, Hee-Chul Eun, Jung Hoon Choi, Hwan-Seo Park, Jin-Mok Hur, Do-Hee Ahn
언어
영어(ENG)
URL
https://www.earticle.net/Article/A256729
※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.
원문정보
초록
영어
A commercially available copper mesh was investigated as an iodine off-gas capturing medium for pyroprocessing, with an aim to replace costly silver based adsorbents. Theoretical calculation results suggested that the reaction between metallic copper and gaseous iodine will occur spontaneously to produce copper iodide in the temperature range of 100 ~ 500℃. The effect of the reaction temperature on iodine capturing efficiency was investigated by experimentation, and it was found that 5 and 6 wt% of iodine (initial mass 2.0 g) was captured by a single copper mesh (0.26 g) at 300 and 400℃, respectively. The repeated experimental results also suggested that copper utilization can be increased with the help of the spontaneous detachment of the reaction product (CuI) from a copper mesh. The formation of the CuI phase was confirmed using the X-ray diffraction technique, and the surface morphology of the reaction product was observed using scanning electron microscopy.
한국어
본 연구에서는 파이로프로세싱에서 발생하는 배기체 내 요오드 포집을 위한 매질로서 고가의 은 기반 흡착제를 대체하기 위 한 상용 구리메쉬의 가능성에 대해 연구하였다. 열역학적 계산을 통해 구리 금속과 요오드 기체의 반응은 100 ~ 500℃ 온도 범위에서 자발적으로 일어나며 요오드화구리(CuI)를 형성할 것으로 예상되었다. 실험을 통해 반응 온도에 따른 요오드 포 집 효율의 영향을 분석한 결과, 1개의 구리메쉬(질량 0.26 g)를 이용하여 반응 온도를 300, 400℃로 변화하였을 때 각각 5 및 6 wt%의 요오드(초기질량 2.0 g)가 포집됨을 확인하였다. 또한, 반복 실험 결과를 토대로 구리메쉬 표면에 형성된 반응 생성 물(CuI)의 자발적인 탈리 현상으로 구리의 활용률이 증가할 수 있음을 확인하였다. 반응 생성물의 CuI 상 형성은 X-선 회절 실험을 통해 확인하였으며, 표면 분석은 주사전자현미경을 이용하여 수행하여 그 결과를 보고하였다.
한국방사성폐기물학회는 국내 방사성폐기물 관리 분야 산ㆍ학ㆍ연 관계자들의 학술단체로 학술연구발표회 및 강연회 개최, 학술간행물 발간 등의 학술 진흥사업, 방사성폐기물에 관한 국제교류 및 협력 증진사업, 방사성폐기물에 관한 위탁연구 자문 및 평가사업 수행 등으로 국내 방사성폐기물 관리 분야 전반의 내부 역량 강화와 경쟁력 확보를 도모하고자 한다. 더 나아가 국가사회 발전에 미치는 중요성을 인식하는 계기를 만들고자 한다. 또한 이러한 활동을 통하여 국가경제 발전과 국민건강에 일조할 수 있도록 하며, 궁극적으로는 한국방사성폐기물학회가 세계 속의 학술단체로의 발전해 나가는 것을 목표로 한다.
간행물
간행물명
방사성폐기물학회지 [Journal of Nuclear Fuel Cycle and Waste Technology (JNFCWT)]