Earticle

초록

영어

The ultrasonic buffer rod used for polymer testing under the high temperature, not only needs high transmission ultrasound characteristic of SNR, but also low acoustic attenuation, high temperature and strong mechanical properties etc are needed. The role PEEK rod plays in this paper is transmitting ultrasonic guided waves and temperature buffer, so the design of PEEK rod is the key. Through the experimental analysis, the SNR with different diameter and length is gave, and the effect on the ultrasonic characteristics of echo signal is also presented, in order to ensure the high SNR. The conclusions provide a theoretical basis for NDT.

목차

Abstract
 1. Introduction
 2. The Effect on Buffer Rod Material to the Propagation of Ultrasonic Guided Wave
 3. The SNR of PEEK Buffer Rod with Different Diameter and Length
 4. The Design of Buffer Rod with Different Specifications
 5. The Test of Temperature Properties for Buffer Rod
 6. Conclusions
 References

키워드

저자

• Yang Hu [ National Key Laboratory For Electronic Measurement Technology, North University of China, Taiyuan 030051,China ] Corresponding author
• Ma Wenliang [ Inner Mongolia First Machinery Group Corporation, Baotou 014030, China ]
• Wang Zhaoba [ National Key Laboratory For Electronic Measurement Technology, North University of China, Taiyuan 030051,China ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  International Journal of Hybrid Information Technology

• 간기

  격월간

• pISSN

  1738-9968

• 수록기간

  2008~2016

• 십진분류

  KDC 505 DDC 605