The regular safety inspection of vehicles in service has been tested up to now not by a plate type (dynamic) inspection system but by a roller type (static) inspection system in our country (in Korea). Therefore, the roller type inspection can not reflect the inertia force that there is a load transfer from the rear axle to the front axle during braking. In this study, before introducing the plate type inspection system, the effect on braking force characteristics according to entering velocities of vehicles in service are evaluated statistically. As the results, the reliable entering velocity range is about from 7 km/h to 14 km/h. Also, the regular vehicle safety inspection in domestic country need to adopt the plate type (dynamic) braking force inspection system which can reflect the inertia force.
목차
Abstract 1. 서론 2. 동적 제동력 기본 이론 3. 연구내용 및 방법 3.1 제동력 검사 기준 3.2 동적 제동력 검사 장비 3.3 진입속도별 동적 제동력 검사 비교시험 4. 연구결과 및 고찰 4.1 진입속도에 대한 주제동력의 상관관계 4.2 정적, 동적(J), 동적(H ) 제동력 검사 장비에 대한 진입속도에 따른 주제동력의 상관관계 5. 결론 References
키워드
Dynamic braking force inspection(동적 제동력 검사)Vehicle in service(운행 자동차)Coefficient ofdetermination(R2 결정계수)p-Value(유의확률)Entering velocity(진입 속도)
저자
오상엽 [ Sang-yeob Oh | Member, Kyungpook National University ]
Corresponding Author