Earticle

초록

영어

With the rapid development of biomass pyrolysis fuel technology, the technology about heating through heat-carrier as an important part of biomass pyrolysis fuel process is also to mature. However, since there is a relatively great temperature difference after carrier heating, the biomass pyrolysis products and oil production rate are affected ultimately. Therefore, this article first introduces several kinds of biomass pyrolysis fuel technology about heating through heat-carrier, and then leads to a design of a fine temperature control device through analysis and comparison to keep the initial temperature difference within ±10 ℃ for the carrier in main reactor so that it can satisfy the temperature demand of biomass pyrolysis and promote the industrialization of biomass pyrolysis fuel.

목차

Abstract
 1. Research Status of Biomass Pyrolysis Fuel Technology about Heating Through Heat-carrier
  1.1 Gas Heat-carrier –the Indirect Heating Furnace with Circulating Air-duct
  1.2 Solid Heat-carrier –the Direct Heating Furnace
  1.3 Solid Heat-carrier – the Compound Heating Furnace
 2. The Design of the Fine Temperature Control Device
  2.1 The Basic Principles of Fine Temperature Control Device
  2. 2 Calculation of the Fine Temperature Control Device Theory
 3. Summary
 References

키워드

저자

• Liu Xin [ Northeast Forestry University, Harbin 150040, P.R.China ]
• Wang Shuyang [ Northeast Forestry University, Harbin 150040, P.R.China ] Corresponding Author
• Sunbing Xiao [ Northeast Forestry University, Harbin 150040, P.R.China ]
• Xueguo Lei [ Northeast Forestry University, Harbin 150040, P.R.China ]
• Cao Youwei [ Northeast Forestry University, Harbin 150040, P.R.China ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  International Journal of Smart Home

• 간기

  격월간

• pISSN

  1975-4094

• 수록기간

  2008~2016

• 십진분류

  KDC 505 DDC 605