Earticle

현재 위치 Home

Thermal-hydraulic Analysis of Buffer System for Hydraulic Pile Hammers by Pseudo-bond Graph

첫 페이지 보기
  • 발행기관
    보안공학연구지원센터(IJHIT) 바로가기
  • 간행물
    International Journal of Hybrid Information Technology 바로가기
  • 통권
    Vol.8 No.2 (2015.02)바로가기
  • 페이지
    pp.267-278
  • 저자
    Kejun Li, Junping Hu
  • 언어
    영어(ENG)
  • URL
    https://www.earticle.net/Article/A241949

※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

원문정보

초록

영어
The damage of cylinder and equipment due to the pile detaching can be avoided by using the buffer device with large flow, which adopts throttle buffer inside the cylinder combining with the control of the relief valve outside the cylinder. To investigate the thermodynamic characteristics of the cylinder chambers and the law of movement of piston, the accurate mathematic model need to be established so the method based on pseudo-bond graph is introduced. According to the conservation equations for mass and energy, the thermal-hydraulic pseudo bond graph C and R elements are developed, and the connection rule for the two elements are determined based on their input and output variables. The bond graph model of the buffer system containing the coupled of multiple energy domains is obtained in a unified way based on the structure and working principle of buffer device, then the system state equations have been derived from the model. The model can be used in variable parameters’ simulation with the parameters in the experiment, the pressure simulation data of two chambers of impact cylinder agree well with the experimental results, which indicate that the model can be used for the design and optimization of buffer device of hydraulic pile hammer.

목차

Abstract
 1. Introduction
 2. Pseudo Bond Graph Elements for Thermal-hydraulic Model
  2.1. Pseudo Bond Graph C Element for the Capacitive Component
  2.2. Pseudo Bond Graph R Element for the Resistance Component
  2.3. Heat Transfer Calculation
 3. Description of Buffer System
  3.1. The Structure of Buffer Device
  3.2. The Working Principle of Buffer System
 4. Hammers Buffer System Modeling
 5. Simulation Results and Discussions
 6. Conclusion
 Acknowledgements
 References

키워드

hydraulic pile hammer buffering device pseudo bond graph multi-energy coupling simulation

저자

  • Kejun Li [ College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China ]
  • Junping Hu [ College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    보안공학연구지원센터(IJHIT) [Science & Engineering Research Support Center, Republic of Korea(IJHIT)]
  • 설립연도
    2006
  • 분야
    공학>컴퓨터학
  • 소개
    1. 보안공학에 대한 각종 조사 및 연구 2. 보안공학에 대한 응용기술 연구 및 발표 3. 보안공학에 관한 각종 학술 발표회 및 전시회 개최 4. 보안공학 기술의 상호 협조 및 정보교환 5. 보안공학에 관한 표준화 사업 및 규격의 제정 6. 보안공학에 관한 산학연 협동의 증진 7. 국제적 학술 교류 및 기술 협력 8. 보안공학에 관한 논문지 발간 9. 기타 본 회 목적 달성에 필요한 사업

간행물

  • 간행물명
    International Journal of Hybrid Information Technology
  • 간기
    격월간
  • pISSN
    1738-9968
  • 수록기간
    2008~2016
  • 십진분류
    KDC 505 DDC 605

이 권호 내 다른 논문 / International Journal of Hybrid Information Technology Vol.8 No.2

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장