Earticle

초록

영어

For the vertical and horizontal dual 5-axis system of a new turning-milling compound machining center, the dedicated post processor for 5-axis is developed by C++ programming language, B-axis pendulum angle error measurement technology and nonlinear error compensation algorithm are studied; and also analyzed and verified in actual processing; Researches show that: the dual 5-axis post processor works correctly and efficiently, better processing accuracy than 0.05mm can be obtained by nonlinear interpolation compensation for B-axis pendulum angle for 3 times, which meets the demand of crafts machining.

목차

Abstract
 1．Introduction
 2. HTM50200 Structure Profile
 3. The Construction of Post Processor based on UG POSTBUILDER
  3.1. Functional Analysis of Dedicated Post-processing
  3.2. Dedicated Post-processing Algorithm
  3.3. Linear Coordinate Transformation
 4. The Error Checking of Swing Angle and Nonlinear Compensation for Tool
 5. Processing Test Study
 6. Conclusion
 Acknowledgements
 References

키워드

저자

• Yuhou Wu [ School of Mechanical Engineering, Dalian University of Technology, Dalian, College of Traffic & Mechanical Engineering, Shenyang Jianzhu University, Shenyang, China ]
• Dehong Zhao [ School of Mechanical Engineering, Dalian University of Technology, Dalian, College of Traffic & Mechanical Engineering, Shenyang Jianzhu University, Shenyang, China ]
• Li Ning [ College of Traffic & Mechanical Engineering, Shenyang Jianzhu University, Shenyang, China ]
• Sun Jing [ College of Traffic & Mechanical Engineering, Shenyang Jianzhu University, Shenyang, China ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  International Journal of Control and Automation

• 간기

  월간

• pISSN

  2005-4297

• 수록기간

  2008~2016

• 십진분류

  KDC 505 DDC 605