Earticle

현재 위치 Home

GNSS 신호생성기에서 DCO 누적오차 보상 알고리즘
Compensation Algorithm of DCO Cumulative Error in the GNSS Signal Generator

첫 페이지 보기
  • 발행기관
    한국위성정보통신학회 바로가기
  • 간행물
    한국위성정보통신학회논문지 KCI 등재후보 바로가기
  • 통권
    제9권 제2호 (2014.06)바로가기
  • 페이지
    pp.119-125
  • 저자
    김태희, 신천식, 김재훈
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A232041

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
In this paper, we developed the signal generator of GNSS navigation signals and analysis the performance of DCO(Digitally Clock Oscillator) compensation algorithm for cumulative distance error thorough simulation. In general, To generate a GNSS signal calculates the Doppler and Initial Pseudorange by using the location information of the receiver and the satellite. The GNSS signal generator generates a signal by determine the carrier and code output frequency using the Doppler information which is calculated as a function of time. The output frequency of the carrier and code would be used the DCO scheme. At this time, It extract the bit and code information on a for each sample by accumulating the DCO. an error of Pseudorange is generated by the cumulative error of the DCO. If Pseudorange error occurs, so that the influence to and operation of the receiver. Therefore, in this paper, we implemented the accumulated error compensation algorithm of the DCO to remove the accumulated error components DCO thereof, Pseudorange accumulated error is removed through the experiment, it was confirmed to be a high accuracy can be operated.
한국어
본 논문에서 우리는 GNSS 항법 신호 생성 시뮬레이터 개발 연구를 수행하고, DCO(Digitally Clock Oscillator) 누적오차로 인한 의사거리 오차를 보상하기 위한 알고리즘을 구현한 후 시뮬레이션을 통하여 성능을 분석하였다. 일반적으로 신호를 생성하기 위하 여 위성과 수신기의 위치 정보를 이용하여 초기의사거리 및 도플러를 계산한다. GNSS 신호생성기는 초기 의사거리를 이용하여 신호를 생성할 시점의 비트정보 및 코드정보를 생성하고 시간에 따라 계산된 도플러 정보를 이용하여 코드 및 반송파 출력주파수를 결정한 후 신호를 생성하게 된다. 이때 코드 및 반송파 출력주파수는 DCO를 이용하게 된다. DCO를 누적하여 샘플마다 코드 정보 및 비트정보를 추출하는데 DCO의 누적오차로 인하여 의사거리의 오차가 발생하게 된다. 의사거리 오차가 발생하면 수신기의 항법 해에 영향을 주게 된다. 따라서 본 논문에서는 이러한 DCO 누적오차 성분을 제거하기 위한 DCO 누적오차 보상 알고리즘을 구현하 고 실험을 통하여 의사거리 누적오차가 제거되며 항법해가 정밀해지는 것을 확인할 수 있었다.

목차

요약
 ABSTRACT
 I. 서론
 II. GNSS 신호생성
 III. DCO를 이용한 신호생성 방법
  1. 코드 출력주파수 결정
  2. 반송파 출력 주파수 결정
 IV. DCO 누적오차 보상 알고리즘 구현
 V. 성능평가
  1. 시뮬레이션 환경
  2. 시뮬레이션 결과
 VI. 결론
 참고문헌

키워드

위성항법 의사거리 신호생성 보상 DCO

저자

  • 김태희 [ Taehee Kim | ETRI 위성항법연구실 ]
  • 신천식 [ Cheonsig Sin | ETRI 위성항법연구실 ]
  • 김재훈 [ Jaehoon Kim | ETRI 위성항법연구실 ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국위성정보통신학회 [The Korea Society of Satellite Technology]
  • 설립연도
    1991
  • 분야
    공학>항공우주공학
  • 소개
    우리나라 위성통신·방송사업의 효율적인 추진과 우주과학 및 관련산업 기술 발전에 이바지하고 관련분야 종사자들간의 정보교류와 기술협력에 이바지함을 목적으로 한다.

간행물

  • 간행물명
    한국위성정보통신학회논문지 [Journal of Satellite, Information and Communications]
  • 간기
    계간
  • pISSN
    2384-3853
  • 수록기간
    2006~2017
  • 십진분류
    KDC 567 DDC 629

이 권호 내 다른 논문 / 한국위성정보통신학회논문지 제9권 제2호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장