Earticle

초록

영어

In this study, the changes in collection efficiencies due to the time changes of activated carbons were ascertained, and in order to identify the magnitude of adsorption, the before-use and after-use iodine adsorption values were analyzed. In addition, as a result of examining the characteristics of continuous process and non-continuous process and as a result of investigating whether the emission standards would be maintained, the continuous process and printing facilities were seen as not being able to maintain the emission standards. Also were found, in the case of non-continuous process,–taking into consideration the special nature of the job –for 4Ø palletized charcoal, a collection efficiency near 50% was shown even after 96 hours. Also, when the inlet concentration was about 300ppm, it is thought that the emission standards would be maintained if the activated carbons are replaced within at least 96 hours in the case of 4Ø palletized charcoal and the use was deemed pointless in the case of carbon. The results of this study are expected to provide assistance in selecting replacement periods for activated carbons and in selecting absorbents at the project sites, and are expected to be of significant help in the selection of precipitators that can collect total hydrocarbons for compliance of the emission standards.

목차

Abstract
 1. 서론
 2. 연구대상 및 방법
  2.1 연구대상
  2.2 연구방법
 3. 결과 및 고찰
  3.1 그라비아 인쇄시설
  3.2 고무플라스틱 도장시설(연속공정)
  3.3 철구조물 도장시설(비연속공정)
 4. 결 론
 5. References

키워드

저자

• 김성중 [ Seong Jung Kim | 인천대학교 안전공학과 ] Corresponding Author
• 한대희 [ Dae Hee Han | 인천대학교 안전공학과 ]
• 우인성 [ In sung Woo | 인천대학교 안전공학과 ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  대한안전경영과학회지 [Journal of Korea Safety Management & Science]

• 간기

  계간

• pISSN

  1229-6783

• eISSN

  2288-1484

• 수록기간

  1999~2025

• 십진분류

  KDC 530 DDC 620