Earticle

현재 위치 Home

<학술연구>

노후 가솔린 차량의 정비 전ㆍ후의 배기가스와 연비 비교분석을 위한 실험방법에 대한 연구
The Study for Experimental Method on Comparison Analysis of Exhaust Emission and Fuel Consumption before and after Maintenance for a decrepit gasoline vehicle

첫 페이지 보기
  • 발행기관
    한국기계항공기술학회(구 한국기계기술학회) 바로가기
  • 간행물
    한국기계항공기술학회지(구 한국기계기술학회지) KCI 등재 바로가기
  • 통권
    제16권 제2호 (2014.04)바로가기
  • 페이지
    pp.1261-1266
  • 저자
    유종식, 김철수, 정우원
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A218285

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
The two experiments were done on stationary car at 800rpm, 1500rpm and running car on oscilloscope and chassis dynamometer at the speeds of 20km/h, 60km/h. In this experiment, the relativity between waveform, exhaust emissions and fuel consumption through two experimental methods were measured in case of cars with failures in MAP sensor, O2 sensor, spark plugs. The following results are obtained by analyzing the data relativity between two experimental methods, such as stationary and running tests. A simple stationary test under the maintenance of a decrepit gasoline vehicle would be realistic possibility to predict the fuel consumption and the exhaust emission comparable to results of running test with a chassis dynamometer.

목차

Abstract
 1. 서론
 2. 실험장치 및 방법
  2.1 실험장치의 구성
  2.2 실험 방법
 3. 실험결과 및 고찰
  3.1 인젝터 파형
  3.2 점화 2차 파형
  3.3 유해 배기가스
  3.4 연비
 4. 결론
 References

키워드

Chassis dynamometer(섀시다이너모미터) Stationary test(정지실험) Running test(주행실험) Exhaust emission(유해 배기가스) Fuel consumption(연료소비량) Decrepit vehicle(노후차량)

저자

  • 유종식 [ Jongsik Yoo | 대원대학교 자동차기계계열 ]
  • 김철수 [ Chulsoo Kim | 강릉원주대학교 기계자동차공학부 ] 교신저자
  • 정우원 [ Woowon Jung | 강원지역사업평가원 선임연구원 ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국기계항공기술학회(구 한국기계기술학회) [Korean Society of Mechanical Technology]
  • 설립연도
    1999
  • 분야
    공학>기계공학
  • 소개
    기계 관련 산업 분야에 관한 학술과 현장 적용 기술을 연구하고 교류하며, 이에 관련된 학문과 기술 발전 및 보급에 기여함으로써 과학과 기술의 진흥에 이바지함을 그 목적으로 한다.

간행물

  • 간행물명
    한국기계항공기술학회지(구 한국기계기술학회지) [Journal of the Korean Society of Mechanical and Aviation Technology ]
  • 간기
    격월간
  • pISSN
    1229-604X
  • eISSN
    2508-3805
  • 수록기간
    1999~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 550 DDC 620

이 권호 내 다른 논문 / 한국기계항공기술학회지(구 한국기계기술학회지) 제16권 제2호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장