Earticle

초록

영어

In order to improve the accuracy and reliability of temperature measurements, put forward a kind of high precision non-contact temperature measuring system, which is composed of the quartz temperature sensor array and microprocessors. The sensor used by the system is the quartz tuning fork non-contact temperature sensor based on polymer line, and the polymer line that is highly sensitive to temperature is as the sensitive element, in combination with quartz tuning fork resonator that is not sensitive to the temperature , and they form the high precision temperature sensor together. Compared with the traditional thermometry, set up a new temperature sensor array to measure temperature, which uses the Bayes estimation to fuse the data measured by the temperature sensor array, and calculate the accurate temperature measurements. The experimental results shown that the measurement precision of sensing system is 0.02℃, and the sensitivity is 71.5×10-6/℃within temperature range from 0°C to 100°C.The system has advantages of the high precision, and the good stability, and reliable performance, etc.

목차

Abstract
 1. Introduction
 2. The Composition of the Sensor Array
  2.1. The Structure and the Principle of the Quartz Temperature Sensor
  2.2. Design of the Sensor Array
 3. The Fusion of Data
 4. Conclusions
 Acknowledgment
 References

키워드

저자

• Jing Ma [ School of Measurement–Control Technology and Communications Engineering Harbin University of Science and Technology Harbin, China ]
• Hai-bo Xu [ School of Automation Harbin University of Science and Technology Harbin, China ]
• Hong-bo Wu [ School of Automation Harbin University of Science and Technology Harbin, China ]
• Jun Xu [ School of Automation Harbin University of Science and Technology Harbin, China ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  International Journal of Signal Processing, Image Processing and Pattern Recognition

• 간기

  격월간

• pISSN

  2005-4254

• 수록기간

  2008~2016

• 십진분류

  KDC 505 DDC 605