When the prestress is introduced to a typical I-shaped steel beam, the introduction efficiency of prestress is significantly low due to its large axial stiffness. In authors’ previous study, the steel beam with continuous corrugated webs was proposed to increase the prestress introduced to top and bottom flanges utilizing the accordion effect. Although it is considered as one of the effective alternatives, however, the fabrication of a continuous corrugated webbed-steel beam requires a large amount of steel material and heavy welding work. Thus, in this study, the steel beam with discontinuous webs was developed to overcome such a limitation in the fabrication of the continuous corrugated webbed-steel beam. Two full-scaled steel beam specimens with discontinuous webs were fabricated and tested, and the finite element analyses were also carried out. Based on the test and analysis results, it is confirmed that the steel beam with discontinuous webs have a good prestress introduction efficiency, and it is comparable to that of the continuous corrugated webbed-steel beam.
한국어
I형 철골보에 프리스트레스가 도입될 때 철골보의 강한 축강성에 의해 도입 프리트르레스는 현저히 낮아지게 된다. 이러한 문제점을 보완하기 위해 본 저자는 기존 연구에서 아코디온 효과를 이용하여 상 하부 플랜지에 도입 프리스트레스를 높일 수 있는 파형형태의 웨브를 제안하였다. 프리트스레스 도입 효율을 높일 수 있는 효과적인 대안이었지만, 파형 형태의 웹을 도입하는 것은 상대적으로 물량이 많이 소요되고 많은 용접작업 과정을 필요로 하였다. 따라서 이 연구에서는 불연속 웨브를 갖는 철골보를 고안하여 연속형 파형웨브를 갖는 철골보의 한계를 극복하였다. 불연속웨브를 갖는 두 개의 실물사이즈 철골보를 제작하여 실험을 수행하였으며, 유한요소해석을 수행하였다. 실험 및 해석결과에 근거하여 불연속 웨브를 갖는 철골보는 연속형 파형웨브를 갖는 철골보의 프리스트레스 도입효율이 유사하였음을 확인하였다.
목차
Abstract 1. 서론 2. 실험 계획 및 방법 2.1 실험체 2.2 사용재료및 프리스트레스 도입 2.3 실험 계측 3. 유한요소해석 4. 결과 및 분석 4.1 실험결과 및 분석 4.2 해석결과 및 분석 5. 결론 참고문헌
키워드
불연속웹아코디언효과프리스트레스파형웹Discontinuous webAccordion effectPrestressCorrugated web
저자
오재열 [ Oh, Jae Yuel | 서울시립대학교 건축공학과 박사과정 ]
김강수 [ Kim, Kang Su | 서울시립대학교 건축공학과 부교수, 공학박사 ]
교신저자
이득행 [ Lee, Deuck Hang | 서울시립대학교 건축공학과 박사과정 ]
황진하 [ Hwang, Jin-Ha | 서울시립대학교 건축공학과 박사과정 ]
김흥열 [ Kim, Heung-Yeul | 건설기술연구원 화재안전연구센터 수석연구원, 공학박사 ]
대한건축학회지회연합회 [The Regional Association of Architectural Institute of Korea]
설립연도
2000
분야
공학>건축공학
소개
본회는 건축에 관한 학술․ 예술․ 기술을 연구 연마하는 지회회원들의 입지향상과 회원상호간의 친목도모와 함께 건축 문화창달에 기여함을 목적으로 한다.
목적을 달성하기 위하여 다음의 사업을 한다.
1. 지회회원의 입지향상과 친목도모
2. 건축에 관한 조사․연구지도 및 이에 관련된 사업
3. 회지, 논문집, 연구보고서 기타 건축에 관한 도서의 간행
4. 건축에 관한 강습회․강연회․간담회․전람회․견학회 등의 개최
5. 건축에 관한 계획, 감독, 기술검토에 대한 국가공공기관 기타의뢰에 관한 사항
6. 국내외 관계 제 학회와의 교류 및 회의참석
7. 기타 본회 목적달성에 필요한 사업
간행물
간행물명
대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]