Earticle

초록

영어

We have clearly investigated with respect to the survival of the insulator at cryogenic temperature under the electrical stress. The breakdown and voltage-time characteristics of turn-to-turn models for point contact geometry and surface contact geometry using copper multi wrapped with polyimide film for an HTS transformer were investigated under AC and impulse voltage at 77 K. Polyimide film (Kapton) 0.025 mm thick is used for multi wrapping of the electrode. As expected, the breakdown voltages for the surface contact geometry are lower than that of the point contact geometry, because the contact area of the surface contact geometry is lager than that of the point contact geometry. The time to breakdown t50 decreases as the applied voltage is increased, and the lifetime indices increase slightly as the number of layers is increased. The electric field amplitude at the position where breakdown occurs is about 80 % of the maximum electric field value. The relationship between survival probability and the electrical stress at cryogenic temperature was evident.

목차

Abstract
 1. INTRODUCTION
 2. ERIMENTAL SETUP AND PROCEDURE
 3. RESULTS AND DISCUSSION
  3.1. Breakdown and voltage-time characteristics
  3.2. Survival and hazard analysis
 4. CONCLUSION
 REFERNCES

키워드

저자

• Seung-Myeong Baek [ Department of Fire Protection Engineering, Changwon Moonsung University, Changwon 641-771, Korea ] Corresponding author
• Sang-Hyun Kim [ Department of Electrical Engineering, Gyeongsang National University, Jinju660-701, Korea ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  한국초전도·저온논문지 (구 한국초전도저온공학회논문지) [Progress in Superconductivity and Cryogenics]

• 간기

  계간

• pISSN

  1229-3008

• eISSN

  2287-6251

• 수록기간

  1999~2026

• 등재여부

  KCI 등재,SCOPUS

• 십진분류

  KDC 427 DDC 537