Diesel engines are widely used in almost all walks of life and cannot be dispensed with in the near future. As the fossil fuels now mainly used in diesel engine and continually depleting accompanied by increasing consumption and prices day by day, there is a need to find out an alternative fuel to fulfill the energy demand of the world. Alternative fuels like biodiesel, are being used as an effective alternative to diesel. The feasibility of biodiesel production from palm oil was investigated with respect to its fuel properties. Though biodiesel can replace diesel satisfactorily, problems related to fuel properties persist. In this study an oxygenated additive diethyl ether (DEE) was blended with palm oil biodiesel (POME) in the ratios of 2%, 4%, 6% and 8% and tested for their properties improvement. These blends were tested for energy content and various fuel properties according to ASTM standards. Qualifying of the effect of additive on palm biodiesel fuel properties can serve the researchers who work on biodiesel fuels to indicate the fuel suitability for diesel engines according to fuel standards. Blends of DEE in POME resulted in an improvement in acid value, viscosity, density and pour point with increasing content of DEE, accompanied by a slight decrease in energy content of biodiesel.
목차
Abstract 1. Introduction 2. Materials and Method 3. Results and Discussions 3.1. Analysis of Biodiesel Properties 3.2. Cloud Point and Pour Point Results 3.3. Density Results 3.4. Viscosity Results 3.5. Acid Value 3.6. Heating Value 4. Conclusions Acknowledgements References
Obed M. Ali [ Faculty of Mechanical Engineering, Universiti Malaysia Pahang, Haweja Technical Institute, Foundation of Technical Education, Kirkuk, Iraq ]
Rizalman Mamat [ Faculty of Mechanical Engineering, Universiti Malaysia Pahang ]
Che Ku M. Faizal [ Faculty of Chemical Engineering and Natural Resource, University Malaysia Pahang ]
보안공학연구지원센터(IJAST) [Science & Engineering Research Support Center, Republic of Korea(IJAST)]
설립연도
2006
분야
공학>컴퓨터학
소개
1. 보안공학에 대한 각종 조사 및 연구
2. 보안공학에 대한 응용기술 연구 및 발표
3. 보안공학에 관한 각종 학술 발표회 및 전시회 개최
4. 보안공학 기술의 상호 협조 및 정보교환
5. 보안공학에 관한 표준화 사업 및 규격의 제정
6. 보안공학에 관한 산학연 협동의 증진
7. 국제적 학술 교류 및 기술 협력
8. 보안공학에 관한 논문지 발간
9. 기타 본 회 목적 달성에 필요한 사업
간행물
간행물명
International Journal of Advanced Science and Technology
간기
월간
pISSN
2005-4238
수록기간
2008~2016
십진분류
KDC 505DDC 605
이 권호 내 다른 논문 / International Journal of Advanced Science and Technology Vol.52