Earticle

초록

영어

This paper parabolic satellite antenna aims to track the precise location of a moving ship or, in the car that can be used to design the system. That was previously used with the reaction rate of a stepping motor, BLDC motor, in order to suppress the noise two-axis control and a separate encoder to the six degrees of freedom motion system was implemented in a precise location. In order to overcome various disturbances gyro sensor Yaw, Pitch, Roll 3 axes were used. To respond immediately to the disturbance at the same time, two-axis motor by controlling the precise location of the system was designed to compensate instantaneously. In addition, the circle tracking algorithm has applied for our system. We designed that the AGC signal of digital tuner quickly had gone to up to the maximum point. In order to solve the various communication errors such as moving the antenna or ground, we had designed the control system

목차

Abstract
 1. Introduction
 2. BLDC Motor Position Control
  2.1. BLDC Motor Drive Principle
  2.2. PI Controller Design for BLDC Motor Position Control
 3. Precise Attitude Control
  3.1. Analysis of Gyro Sensor
  3.2. AGC Signal Detection and Initialization of Satellite Antenna Tracking Algorithm
  3.3. 2-Axis Bldc Motor Control Using Gyro Sensor
 4. Experimental Results and Discussion
  4.1. System Construction and Design
  4.2. Experimental Disturbance Compensation
  4.3. Experimental Satellite Tracking
  4.4. AGC Experiment when Disturbance Input
 6. Conclusion
 Acknowledgements
 References

키워드

저자

• Myeongkyun Kim [ Electronic Engineering of Cheongju University ]
• Jinsoo Kim [ Electronic Engineering of Cheongju University ]
• Oh Yang [ Electronic Engineering of Cheongju University ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  International Journal of Smart Home

• 간기

  격월간

• pISSN

  1975-4094

• 수록기간

  2008~2016

• 십진분류

  KDC 505 DDC 605