Earticle

현재 위치 Home

다발형 폴리아미드섬유 보강 콘크리트의 역학적 성능평가
Evaluation on the Mechanical Performance of Concrete Using Entanglement Polyamide Fiber

첫 페이지 보기
  • 발행기관
    한국재난정보학회 바로가기
  • 간행물
    한국재난정보학회논문집 바로가기
  • 통권
    제8권 3호 통권17호 (2012.09)바로가기
  • 페이지
    pp.223-233
  • 저자
    Joong Kyu Jeon, Gyu Yong Kim, Chan Ki Jeon, Soo Choul Lee
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A186893

※ 기관로그인 시 무료 이용이 가능합니다.

4,200원

원문정보

초록

영어
Steel fiber is high stiffness and large weight. So, Pumping hose to rupture of the safety management is difficult. Steel fiber caused by corrosion of the deterioration of durability and high-rebound losses are needed for the improvements. Thus, the revised regulations in 2009 by a steel fiber to reinforce other materials is possible. Variety of fiber reinforcement material for concrete review of applicability is needed. Steel fiber strength than the other fibers is large and by the geometry of the fibers are attached to improve performance. However, compared to steel fiber organic fibers and low modulus of elasticity and tensile strength of fiber and agglomeration occurs in the concrete to be used as reinforcement material is difficult. In this regard, the present study as a single object in the micro-fiber bouquet sharp entanglement through make muck attach surface area, distributed fibers from surfactant of the surface enhanced polyamide fibers, steel fiber and PP fiber reinforced concrete by comparing the scene to provide a basis for the use.
한국어
콘크리트의 보강재료로 사용되고 있는 강섬유는 강성이 크고 중량이 무거워 안전관리의 어려움이 있으며, 강섬유의 부식으로 인한 내구성 저하 및 높은 리바운드 손실량이 등이 개선사항으로 요구되고 있다. 이와같이 2009년 개정된 규정에 의해 강섬유 외의 재료보강이 가능해짐에 따라 콘크리트 보강재료로서 강섬유 이외의 다양한 섬유의 적용성 검토가 필요한 실정이다. 강섬유는 기타섬유에 비해 강성이 크고, 섬유의 형상에 따라 부착성능을 개선하였만, 유기섬유의 경우 강섬유에 비해 일반적으로 탄성계수 및 인장강도가 낮고 섬유의 뭉침현상이 발생하여 콘크리트 보강재료로 사용하기 위해서는 적절한 섬유 개질이 필요한 실정이다. 이러한 관점에서, 본 연구에서는 미세섬유를 다발형 단일 개체로서 공기 압출성형을 통해 부착 비표면적을 크게 하여 역학적 성능을 고려하고, 섬유의 표면을 계면 활성제로 개질하여 분산성을 향상시킨 폴리아미드섬유와 강섬유, PP섬유를 혼입한 콘크리트를 비교하여 현장 활용을 위한 기초 자료를 제시하고자 한다.

목차

ABSTRACT
 1. 서론
 2. 실험계획 및 방법
  2.1 실험계획 및 배합
  2.2 다발형 폴리아미드섬유의 특징
  2.3 콘크리트 믹싱 및 시험체 제작
 3. 실험결과 및 분석
  3.1 슬럼프
  3.2 압축강도, 인장강도 및 취도계수
  3.3 휨강도
  3.4 콘크리트 단면상태 및 미세분석
 4. 결론
 감사의 글
 References

키워드

강섬유 폴리프로필렌섬유 폴리아미드섬유 압축강도 휨강도 steel fiber polypropylene fiber polyamide fiber compressive strength bending strength

저자

  • Joong Kyu Jeon [ Infrastructure Research Lab, R&BD Center, Klong Global Corp. ]
  • Gyu Yong Kim [ Department of Architecture Engineering, Chungnam National University ]
  • Chan Ki Jeon [ Urban and Environmental Engineering Department, University of Incheon ]
  • Soo Choul Lee [ Department of Givil & Environmental Engineering, Gacheon University ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국재난정보학회 [The Korean Society of Disaster Information]
  • 설립연도
    2005
  • 분야
    사회과학>사회복지학
  • 소개
    한국재난정보학회는 공공기관, 학계, 연구기관 그리고 민간관련회사 등의 상호협력과 유대강화를 통하여 국가 및 민간차원의 안전관련 재난정보 공유를 통한 재난사고에 대한 예방시스템 구축, 재난예방 관련 전문가 양성 교육, 연구용역 등 학문발전에 기여함을 목적으로 한다.

간행물

  • 간행물명
    한국재난정보학회논문집 [Journal of The Korean Society of Disaster Information]
  • 간기
    계간
  • pISSN
    1976-2208
  • 수록기간
    2005~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 338 DDC 361

이 권호 내 다른 논문 / 한국재난정보학회논문집 제8권 3호 통권17호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장