Earticle

현재 위치 Home

석조문화재의 구조적 보강을 위한 금속보강재 정착길이 연구
A Study on the Anchorage Length of Metal Stiffeners for the Structural Reinforcement of Stone Cultural Heritages

첫 페이지 보기
  • 발행기관
    한국문화유산보존과학회(구 한국문화재보존과학회) 바로가기
  • 간행물
    보존과학회지 KCI 등재 바로가기
  • 통권
    제28권 제2호 (2012.06)바로가기
  • 페이지
    pp.141-151
  • 저자
    김사덕, 이동식, 김현용
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A177190

※ 기관로그인 시 무료 이용이 가능합니다.

4,200원

원문정보

초록

영어
It was the 1900s that the damaged materials of stone heritages began to be preserved and managed for the purpose of reuse, especially since cement, an inorganic material, began to be used during the Japanese colonial period. Epoxy resin, an organic material, was introduced to architecture around the turn of the 1990s, and has been being used across the board. In particular, filler mixtures began to be aggressively used for the structural reinforcement of severed materials. The problem was metal stiffeners used for structural reinforcement. The anchorage length varied depending in different conservation scientists, and as a result the secondary damage was apt to occur in the materials. In this study, hereat, a calculation was made of the most effective anchorage length with the minimization of material damage. The results were as in the following: the anchorage length of an 8-milimeter-across (ø8) metal stiffener was found to be most effective at 60.88㎜. Those of ø12 and ø16 were 60.88㎜ and 91.32㎜ respectively. In the case of other calibers, the anchorage length was calculated by a formula ℓd= at⨍y/uΣ0. In the experiment, helically-threaded round bars were used as metal stiffeners in order that they could bear surcharge loads such as bending, shear and constriction.
한국어
석조문화재의 훼손된 부재를 재사용하기 위한 보존관리는 1900년대부터 시작되었다고 볼 수 있는데 일제강점기 시대에 무기물인 시멘트를 원료로 사용하면서 부터이다. 1990년대에 접어들면서 건축 재료인 유기질의 에폭시수지가 도입되었고 현재에 이르기까지 석조문화재 전반에 활용되고 있다. 특히 절단된 부재의 구조적 보강에도 충전제를 혼합하여 사용하는 등의 적극적인 보존처리 작업이 진행되었다. 그러나 구조적 보강을 위해 넣은 금속봉의 길이는 보존과학자의 인지적 경험을 바탕으로 설계하였기 때문에 다양한 매입길이와 함께 원부재의 2차적 훼손을 유발할 수 있다. 따라서 본 실험을 통해 원부재의 훼손율을 최소화하면서 최대의 구조적 보강을 하기 위해 유효정착길이를 표준화한 결과 ø8㎜는 60.88㎜, ø12㎜는 91.32㎜, ø16㎜는 121.76㎜가 적정하였다. 이 외의 구경은 ℓd= at⨍y/uΣ0을 이용하여 정착길이를 구한다. 이 때 사용된 금속보강재는 전산형 환봉을 사용하여야 휨, 전단, 압축 등의 재하하중에 대항할 수 있었다.

목차

초록
 ABSTRACT
 1. 서론
 2. 연구방법
 3. 실험 및 결과
  3.1. 공시체 제작
  3.2. 실험이론
  3.3. 인발력 실험
  3.4. 파손유형 분석
  3.5. 금속보강재 형태 분석
 4. 결론
 참고문헌

키워드

석조문화재 에폭시 수지 전단 압축 Stone cultural heritage Epoxy resins Bending Shear Constriction

저자

  • 김사덕 [ Sa Dug Kim | 국립문화재연구소 보존과학센터 ]
  • 이동식 [ Dong Sik Lee | 국립문화재연구소 미륵사지석탑보수정비사업단 ] Corresponding Author
  • 김현용 [ Hyun Yong Kim | 국립문화재연구소 미륵사지석탑보수정비사업단 ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국문화유산보존과학회(구 한국문화재보존과학회) [The Korea Society of Conservation Science for Cultural Heritage]
  • 설립연도
    2003
  • 분야
    자연과학>자연과학일반
  • 소개
    본 법인은 문화재 과학적 보존에 관한 제반 학술적 연구 발전 보급을 위하여 문화재 보존기술 개발과 수리 및 복원에 관한 방법을 연구함으로서 문화재의 보존 및 계승에 기여함을 그 목적으로 한다.

간행물

  • 간행물명
    보존과학회지 [Journal of Conservation Science]
  • 간기
    연5회
  • pISSN
    1225-5459
  • eISSN
    2287-9781
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 602 DDC 700

이 권호 내 다른 논문 / 보존과학회지 제28권 제2호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장