Earticle

초록

영어

Recently, various efforts to make more speedy and precision machine tool to improve productivity and also various efforts to solve environmental problem are going on, so that dry cutting in manufacturing industry, which needs environmental conscious design and development of manufacturing technique, is becoming a very important assignment to solve. Because dry cutting does not use cutting fluid, we need other methods that can be used instead of cutting fluid, which does cooling, lubricating, chip washing, and anti-corrosion. Especially, because turning is a continuous work, the consideration of tool life and surface roughness due to continuous heat and poor lubrication is important. The purposes of this paper are the consideration of how well the compressed air can work instead of cutting fluid, and also the development of the method to select the optimum machining condition by the minimum numbers of experiments through the Taguchi method.

목차

Abstract
 1. 서론
 2. 실험장치 및 실험방법
  2.1 실험장치
  2.2 절삭공구 및 피삭재
  2.3 실험방법
 3. 실험 결과 및
  3.1 절삭력(Cutting force)
  3.2 공구마모(Tool wear)
  3.3 표면 거칠기(Surface roughness)
  3.4 최적 가공조건 선정
 4. 결론
 참고문헌

키워드

건식 가공 절삭유 선삭 공구마모 표면 거칠기 다구찌 실험계획법 Dry Cutting Cutting Fluid Turning Tool Wear Surface Roughness Taguchi Method

저자

• 장승순 [ S. S. Jang | Georgia Institute of Technology(USA), Professor, School of Materials Science and Engineering ]
• 이정익 [ J. I. Lee | Inha Technical College, Professor, Dept. of Mechanical Design ]

참고문헌

발행기관

간행물