Earticle

현재 위치 Home

고온에서의 섬유보강콘크리트 역학적 성질 연구
A Study on Mechanical Properties of Fiber-Reinforced Concretes under High-Temperature

첫 페이지 보기
  • 발행기관
    대한건축학회지회연합회 바로가기
  • 간행물
    대한건축학회연합논문집 KCI 등재 바로가기
  • 통권
    제13권 제4호 통권 48호 (2011.12)바로가기
  • 페이지
    pp.233-240
  • 저자
    이형주, 최열
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A163039

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
This study describes the experimental study on the mechanical properties of fiber-reinforced concretes containing the three different fibers under the two different exposure temperatures (400oC and 600oC). For this study, jute, aramid and steel fibers were mixed with 0.25% of the constant fiber volume fraction of concrete. Test results shows that the addition of fibers to concrete does not seems to increase the compressive strength significantly when compare to those of plain concretes, and the residual compressive strengths of jute, aramid and steel-fiber reinforced concretes at 400℃were approximately 67.75%, 76.58% and 71.47%, and at 600℃ were approximately 28.63%, 29.84% and 33.97%, respectively. The addition of fibers to concrete does not seems to increase the compressive strength significantly when compare to those of plain concretes. The mass loss and elastic modulus of all fiber-reinforced concretes were decreased with the increased temperature, but the rate of decreasing is very similar.
한국어
이 연구는 각기 다른 세 가지 섬유를 혼합한 섬유보강콘크리트의 노출온도에 따른 물리적 성질에 대하여 연구하였다. 황마, 아라미드, 강섬유를 콘크리트 전체 용적의 0.25%의 일정한 양을 혼입하여 시험체를 제작하였다. 시험결과, 황마섬유보강콘크리트의 잔류 압축강도가 아라미드와 강섬유를 혼입한 보강콘크리트보다 낮게 나타났으나, 그 차이는 미미했다. 모든 섬유보강콘크리트의 중량손실과 탄성계수 또한 온도가 증가할수록 비슷한 감소율을 보이며 감소하였다.

목차

Abstract
 1. 서론
 2. 실험 계획 및 방법
  2.1 시멘트 및 골재
  2.2 사용 섬유
  2.3 배합설계
  2.4 실험방법
 3. 실험 결과 및 분석
  3.1 섬유혼입에 따른 압축강도의 변화
  3.2 고온에서의 압축강도 변화
  3.3 중량 변화
  3.4 탄성계수의 변화
  3.5 육안검사 및 파괴 양상
 4. 결론
 참고문헌

키워드

황마섬유보강콘크리트 아라미드섬유보강콘크리트 강섬유보강콘크리트 잔류압축강도 고온 Jute-fiber Reinforced Concrete Aramid-Fiber Reinforced Concrete Steel-Fiber Reinforced Concrete Residual Compressive Strength High-Temperature

저자

  • 이형주 [ Lee, Hyoung-Ju | 경북대학교 건축토목공학부 대학원 박사과정 ]
  • 최열 [ Choi, Yeol | 경북대학교 건축토목공학부 부교수, 공학박사 ] 교신저자

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    대한건축학회지회연합회 [The Regional Association of Architectural Institute of Korea]
  • 설립연도
    2000
  • 분야
    공학>건축공학
  • 소개
    본회는 건축에 관한 학술․ 예술․ 기술을 연구 연마하는 지회회원들의 입지향상과 회원상호간의 친목도모와 함께 건축 문화창달에 기여함을 목적으로 한다. 목적을 달성하기 위하여 다음의 사업을 한다. 1. 지회회원의 입지향상과 친목도모 2. 건축에 관한 조사․연구지도 및 이에 관련된 사업 3. 회지, 논문집, 연구보고서 기타 건축에 관한 도서의 간행 4. 건축에 관한 강습회․강연회․간담회․전람회․견학회 등의 개최 5. 건축에 관한 계획, 감독, 기술검토에 대한 국가공공기관 기타의뢰에 관한 사항 6. 국내외 관계 제 학회와의 교류 및 회의참석 7. 기타 본회 목적달성에 필요한 사업

간행물

  • 간행물명
    대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]
  • 간기
    격월간
  • pISSN
    1229-5752
  • 수록기간
    1999~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 540 DDC 690

이 권호 내 다른 논문 / 대한건축학회연합논문집 제13권 제4호 통권 48호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장