Earticle

현재 위치 Home

논문

RSSI 핸드오버 기법 이용한 실내 위치 인식 시스템 개발
Indoor Location-aware System Development using RSSI Handover Technique

첫 페이지 보기
  • 발행기관
    한국차세대컴퓨팅학회 바로가기
  • 간행물
    한국차세대컴퓨팅학회 논문지 KCI 등재 바로가기
  • 통권
    Vol.7 No.3 (2011.06)바로가기
  • 페이지
    pp.39-46
  • 저자
    김일영, 최광석
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A150683

원문정보

초록

영어
In this paper, an accurate and efficient indoor location-aware system is proposed through RSSI(Received Signal Strength Indication) handover technique and using the Zigbee, short-range wireless communication protocol. Among the solutions of several indoor location-aware systems with the use of RSSI value, the using of triangulation measuring method is the most popular. However, due to various environmental factors, the measured RSSI values with the triangulation measuring method are unstable. In this paper, for accurate indoor location-aware system, we propose more stable RSSI value measurement method using the RSSI value transfer between channels, that is, the handover approach. The handover of the mobile node instead of the fixed nodes by using a removable cell handover with the need for location-aware how to select only three fixed nodes were used. Through the finding of the mobile node's coordinates using triangulation measuring method in addition to the measuring the distance between the fixed node and the mobile node using the MLE (Maximum Likelihood Estimation) technique, more accurate indoor location-aware system is proposed, implemented and proved.
한국어
본 논문에서는 근거리 무선 통신 기술인 Zigbee를 활용하고, RSSI 핸드오버 기법을 통하여 보다 정확하고 효율적인 실내 위치 인식 시스템을 제안한다. RSSI(Received Signal Strength Indication) 값을 이용한 실내 위치 인식방식에는 여러 가지가 있는데 가장 대표적인 방법으로는 삼각측량법을 이용하는 경우이다. 하지만 단순히 삼각측량법으로 측정된 RSSI 값은 여러 가지 환경적 요인으로 인해 불규칙하게 되는데, 본 논문에서는 보다 정확한 실내위치 인식을 위하여 RSSI 값의 채널 간 이동, 즉 핸드오버 (Handover)를 이용하여 각 채널간의 간섭을 줄여 안정적인 RSSI 값을 측정하는 방식을 제안한다. 이때 핸드오버는 고정 노드가 아닌 이동노드의 이동식 셀을 사용한 핸드오버를 사용하여 위치 인식에 필요한 세 개의 고정노드만을 선택하는 방법을 사용하였다. MLE(Maximum Likelihood Estimation) 방법을 통해 이동 노드와 고정노드의 거리를 측정하는 동시에 삼각 측량법을 이용하여 이동노드의 좌표를 구하여 보다 정확한 실내 위치를 인식할 수 있는 시스템을 제안하고 구현하여 검증하였다.

목차

요약
 Abstract
 1. 서론
 2. 제안된 핸드오버 방법 및 MLE와 삼각측량법에 의한 위치인식
  2.1 기존 RSSI 값 측정의 문제점
  2.2 이동 노드의 RSSI 수신 범위를 활용한 핸드오버 방식의 제안
  2.3 MLE 방식을 이용한 거리 측정
  2.4 삼각측량법에 의한 이동노드의 좌표 측정
 3. 구현 및 실험결과
 4. 결론
 참고문헌

키워드

실내 위치 인식 시스템 핸드오버 삼각측량 Zigbee RSSI MLE

저자

  • 김일영 [ Ilyoung Kim | 조선대학교 정보통신공학과 ]
  • 최광석 [ Goangseog Choi | 조선대학교 정보통신공학과 ] 교신저자

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국차세대컴퓨팅학회 [Korean Institute of Next Generation Computing]
  • 설립연도
    2005
  • 분야
    공학>컴퓨터학
  • 소개
    본 학회는 차세대 PC 및 그 관련분야의 학술활동을 통하여 차세대 PC의 학문 및 기술발전을 도모하고 산업발전 및 국제협력 증진을 목적으로 한다.

간행물

  • 간행물명
    한국차세대컴퓨팅학회 논문지 [THE JOURNAL OF KOREAN INSTITUTE OF NEXT GENERATION COMPUTING]
  • 간기
    격월간
  • pISSN
    1975-681X
  • 수록기간
    2005~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 566 DDC 004

이 권호 내 다른 논문 / 한국차세대컴퓨팅학회 논문지 Vol.7 No.3

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장