Earticle

현재 위치 Home

금속유물 코팅제와 Cyanoacrylate 접착제의 반응속도 및 원인분석: 초기접착속도를 중심으로
A Study on the Reaction Rate and Cause Analysis of Cyanoacrylate Adhesives According to the Coating Mixtures for Metal Artifacts

첫 페이지 보기
  • 발행기관
    한국문화유산보존과학회(구 한국문화재보존과학회) 바로가기
  • 간행물
    보존과학회지 KCI 등재 바로가기
  • 통권
    제27권 제2호 (2011.06)바로가기
  • 페이지
    pp.135-144
  • 저자
    권희홍, 허일권, 김수기
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A146358

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
When metal artifacts have to undergo conservation treatment, the person in charge of the treatment selects and uses various coating mixtures based on his judgment regarding their condition, material, or environment. Since the kinds of coating mixtures or solvents make a difference in the set time of cyanoacrylate adhesives, they have something to do with the efficiency of the conservation treatment. This study examines the effects and causes that affect the set time of cyanoacrylate adhesives according to the kinds of coating mixtures and solvents and suggests ways to increase the set time. As a result, it is thought that as the surface roughness gets flatter, the wettability of adhesive is improved further, which increases the set time. Moreover, the C-F binding of V-Flon, C-O-C absorption peak, molecular weight of the coating mixtures, and glass transition temperature (Tg) were the factors that significantly affected the set time. According to the result of measuring the set time based on the result of superficial and chemical analysis, relative difference was shown according to the kind and viscosity of adhesive, but all the adhesives indicated the following order of the set time: V-Flon > Paraloid B-72 (in xylene) > Paraloid NAD-10 > Paraloid B-72 (in acetone).
한국어
금속유물 보존처리시 유물 상태, 재질 및 환경 등 보존처리자의 판단에 따라서 다양한 코팅제를 사용하게 된다. 코팅제 종류 및 용제에 따라서 cyanoacrylate 접착제의 초기접착속도에 차이를 나타내므로 보존처리 효율성과 연관이 있다. 본 연구에서는 코팅제 종류와 용제에 따라 cyanoacrylate 접착제의 초기접착속도에 미치는 영향과 원인에 대해 알아보았다. 그 결과, 표면의 거칠기가 편평할수록 접착제의 젖음성이 향상되어 빠른 접착이 이루어졌다. 또한 V-Flon의 C-F, C-O-C 흡수 피크와 코팅제의 분자량과 유리전이온도는 초기접착속도에 영향을 미치는 요인으로 크게 작용하였다. 이와 같은 표면․화학적 분석 결과를 토대로 초기접착속도를 측정한 결과 접착제의 종류 및 점도에 따른 상대적 차이는 있으나 모든 접착제에서 V-Flon > Paraloid B-72(in xylene) > Paraloid NAD-10 > Paraloid B-72(in acetone)순으로 초기접착속도를 확인하였다.

목차

초록
 ABSTRACT
 1. 서론
 2. 이론적 배경
  2.1. Cyanacrylate 접착제
  2.2. 초기접착속도
 3. 실험 재료 및 분석 방법
  3.1. 시편 준비
  3.2 분석 방법
 4. 결과 및 고찰
  4.1. 접촉각 측정
  4.2. 표면의 미세구조 관찰
  4.3. 화학분석
  4.4. 초기접착속도
 5. 결론
 참고문헌

키워드

접착제 초기접착속도 Cyanoacrylate Paraloid B-72 Paraloid NAD-10 V-Flon Cyanoacrylate Adhesive Set time Paraloid B-72 Paraloid NAD-10 V-Flon

저자

  • 권희홍 [ Hee-Hong Kwon | 국립중앙박물관 보존과학팀 ]
  • 허일권 [ Il-Kwon Huh | 국립춘천박물관 보존과학실 ]
  • 김수기 [ Soo-Ki Kim | 용인대학교 문화재학과 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국문화유산보존과학회(구 한국문화재보존과학회) [The Korea Society of Conservation Science for Cultural Heritage]
  • 설립연도
    2003
  • 분야
    자연과학>자연과학일반
  • 소개
    본 법인은 문화재 과학적 보존에 관한 제반 학술적 연구 발전 보급을 위하여 문화재 보존기술 개발과 수리 및 복원에 관한 방법을 연구함으로서 문화재의 보존 및 계승에 기여함을 그 목적으로 한다.

간행물

  • 간행물명
    보존과학회지 [Journal of Conservation Science]
  • 간기
    연5회
  • pISSN
    1225-5459
  • eISSN
    2287-9781
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 602 DDC 700

이 권호 내 다른 논문 / 보존과학회지 제27권 제2호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장