Earticle

현재 위치 Home

강화도 능내리출토 은제유물의 과학적 분석 및 재현실험을 통한 제작기법 연구
A Study of the Manufacturing Technique by Scientific Analysis and Reproduction Experiment of Ancient Silver Objects from Neungnae-ri, Ganghwa Island

첫 페이지 보기
  • 발행기관
    한국문화유산보존과학회(구 한국문화재보존과학회) 바로가기
  • 간행물
    보존과학회지 KCI 등재 바로가기
  • 통권
    제27권 제1호 (2011.03)바로가기
  • 페이지
    pp.1-11
  • 저자
    유동완, 김수기
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A142531

※ 기관로그인 시 무료 이용이 가능합니다.

4,200원

원문정보

초록

영어
For the silver artifacts in the Koryo Dynasty excavated from Neungnae-ri Ganghwa island, the metallographic section analysis and hardness and chemical analysis were conducted. After making samples in the similar ratio of the composition concentration, the changes of the microstructure were checked according to the working method and temperature. The results show that those silver artifacts are Au-Cu alloys with 2 to 6 % of Cu. From the results it is judged that Cu was artificially alloyed with them to keep the proper hardness and identified that they were gilded by the amalgamation process seeing that mercury was included at the guilt layer. Also the porous texture on the surface of them could be formed at over 400℃, therefore, it is assumed the hot working or heat treatment at over 400℃ were performed. In silver artifacts made by the relief and repousse, they have the similar composition analysis to other 7 artifacts but the hardness is lower than pure silver. Consequently from differences in the hardness, it can be inferred that the low hardness of silver artifacts is concerned with manufacturing techniques.
한국어
강화도 능내리에서 출토된 고려시대 은제유물을 대상으로 성분조성과 경도, 조직특성을 연구하고 출토된 은제유물과 비슷한 성분비로 시편을 제작하여 가공방법과 온도에 따라 변하는 미세조직의 변화를 관찰하였다. 그 결과 능내리출토 은제유물의 소지는 Cu가 2~6% 함유된 Ag-Cu 합금으로, Cu는 적절한 경도유지 등 특정 목정을 위하여 인위적으로 합금한 것으로 판단되며, 금으로 이루어진 도금층에서는 Hg가 약 11%의 함량으로 검출되어 아말감법으로 도금한 것으로 판단된다. 또한 일부 은제유물의 표면에서 확인되는 다공질 층은 실험시편 제작을 통한 확인결과 400℃이상의 열이 가해질 때 생성되는 것으로, 능내리출토 은제유물들은 400℃이상의 온도에서 열간가공하거나 열처리를 실시한 것으로 추정된다. 한편, 고부조로 타출된 은제유물 1점은 다른 은제유물과 비슷한 성분조성에도 불구하고 매우 낮은 경도를 보였는데, 이는 타출기법과 관계가 있는 것으로 추정된다.

목차

초록
 ABSTRACT
 1. 서론
 2. 연구대상 및 방법
 3. 분석결과 및 고찰
  3.1. 은제유물
  3.2. 재현실험
 4. 결론
 참고문헌

키워드

은제유물 제작기법 가공방법 Ag-Cu 합금 수은아말감법 Silver objects Manufacturing technique Working method Ag-Cu alloy Amalgam process

저자

  • 유동완 [ Dong-wan Ryu | 국립문화재연구소 문화재보존과학센터 ]
  • 김수기 [ Soo-ki Kim | 용인대학교 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국문화유산보존과학회(구 한국문화재보존과학회) [The Korea Society of Conservation Science for Cultural Heritage]
  • 설립연도
    2003
  • 분야
    자연과학>자연과학일반
  • 소개
    본 법인은 문화재 과학적 보존에 관한 제반 학술적 연구 발전 보급을 위하여 문화재 보존기술 개발과 수리 및 복원에 관한 방법을 연구함으로서 문화재의 보존 및 계승에 기여함을 그 목적으로 한다.

간행물

  • 간행물명
    보존과학회지 [Journal of Conservation Science]
  • 간기
    연5회
  • pISSN
    1225-5459
  • eISSN
    2287-9781
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 602 DDC 700

이 권호 내 다른 논문 / 보존과학회지 제27권 제1호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장