Earticle

현재 위치 Home

석조문화재 보존처리에 사용되는 혼합충전제의 특성분석
Characteristic Analysis on Mixed Filler of Conservation Materials for Stone Cultural Heritage

첫 페이지 보기
  • 발행기관
    한국문화유산보존과학회(구 한국문화재보존과학회) 바로가기
  • 간행물
    보존과학회지 바로가기
  • 통권
    제25권 제4호 (2009.12)바로가기
  • 페이지
    pp.439-450
  • 저자
    송치영, 한민수, 이장존, 전병규, 도민환
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A142484

※ 기관로그인 시 무료 이용이 가능합니다.

4,300원

원문정보

초록

영어
The purpose of this study is to find out characteristics of the fillers made by epoxy resin (L-30) and filling epoxy resin (L-50) with talc, quartz sand and wollastonite with different mixture ratio of 5%, 50%, 80%, 120%, and 150%. The viscometer and colorimeter were used to measure the viscosity and chromaticity of the fillers. Additionally, IC and SEM were used to reveal characteristics of the filler, and checked ultrasonic wave velocity, compressive strength and contact angle to estimate the stability between the filler and stones which are essential for conservation treatments. The filler mixed with the talc had the lowest value in the ultrasonic wave velocity analysis, and its compressive strength decreased as the mixing rate of talc increased. On the other hand, wollastonite had higher values than others in the ultrasonic wave velocity and the compressive strength regardless of epoxy resin type, also, these values increased as mixing rate increased. The properties of the filler, which include the granularity and shape, have influence on characteristics of the stone conservation adhesives. Thus, the filler type, characteristic, and mixture ratio must be considered for effective conservation treatment.
한국어
접착용 에폭시 수지 L-30과 충전용 에폭시 수지 L-50을 대상으로 활석, 규사, 규회석을 중량비 5, 50, 80, 120, 150% 비율로 혼합하여 첨가제에 따른 에폭시수지의 특성을 고찰하였다. 각 재료의 점도와 색도를 측정하고, 이온크로마토그래피 분석, 주사전자현미경관찰을 실시하였다. 또한 실제 석조문화재 적용 시 안정성을 평가하고자 초음파속도와 압축강도, 접촉각 측정을 실시하였다. 활석을 혼합한 경우 에폭시 몰탈은 낮은 초음파 속도를 보이며, 압축강도는 배합비율이 높아짐에 따라 감소하는 경향을 보인다. 반면 규회석을 혼합한 에폭시 몰탈의 경우에는 상대적으로 높은 초음파 속도를 보이며, 배합 비율이 높아짐에 따라 강도가 증가하는 경향이 관찰되었다. 이는 석조문화재의 접착·충전제의 물성이 첨가제의 특성, 즉 입도 및 형태에 의해 영향을 받는다고 해석할 수 있다. 따라서 충전제는 수지의 종류는 물론 첨가제의 종류와 특성, 배합비에 따른 특성이 다르므로, 문화재 적용 시에는 이를 고려한 처리제의 선택이 중요하다.

목차

초록
 ABSTRACT
 1. 서론
 2. 재료 및 방법
  2.1. 재료선정
  2.2. 연구방법
 3. 결과 및 고찰
  3.1. 혼합점도
  3.2. 색도색차
  3.3. 초음파속도
  3.4. 압축강도
  3.5. 이온크로마토그래피 분석
  3.6. 표면의 미세구조 관찰
  3.7. 접촉각 측정
 4. 결론
 참고문헌

키워드

에폭시 수지 활석 규사 규회석 충전제 초음파속도 강도 접촉각 L-30 L-50 Epoxy resin L-30 L-50 Talc Silica powder Wollastonite Filler Ultrasonic wave Compressive strength Contact angle

저자

  • 송치영 [ Chi Young Song | 국립문화재연구소 ]
  • 한민수 [ Min Su Han | 국립문화재연구소 ]
  • 이장존 [ Jang Jon Lee | 국립문화재연구소 ]
  • 전병규 [ Byung Kyu Jun | 국립문화재연구소 ]
  • 도민환 [ Min Hwan Do | 국립문화재연구소 ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국문화유산보존과학회(구 한국문화재보존과학회) [The Korea Society of Conservation Science for Cultural Heritage]
  • 설립연도
    2003
  • 분야
    자연과학>자연과학일반
  • 소개
    본 법인은 문화재 과학적 보존에 관한 제반 학술적 연구 발전 보급을 위하여 문화재 보존기술 개발과 수리 및 복원에 관한 방법을 연구함으로서 문화재의 보존 및 계승에 기여함을 그 목적으로 한다.

간행물

  • 간행물명
    보존과학회지 [Journal of Conservation Science]
  • 간기
    연5회
  • pISSN
    1225-5459
  • eISSN
    2287-9781
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 602 DDC 700

이 권호 내 다른 논문 / 보존과학회지 제25권 제4호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장