Earticle

현재 위치 Home

기기 및 시스템

다양한 선재 조합에 따른 이종 초전도 스위치의 특성 실험 및 분석
Experimental and Analytical Studies on the Characteristics of Fast Switch in Combinations of Various Superconducting Tapes

첫 페이지 보기
  • 발행기관
    한국초전도저온학회 (구 한국초전도저온공학회) 바로가기
  • 간행물
    한국초전도·저온논문지 (구 한국초전도저온공학회논문지) KCI 등재 바로가기
  • 통권
    Vol.13 No.1 (2011.03)바로가기
  • 페이지
    pp.31-35
  • 저자
    이지호, 김영재, 나진배, 최석진, 장재영, 황영진, 김진섭, 고태국
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A139847

※ 기관로그인 시 무료 이용이 가능합니다.
※ 학술발표대회집, 워크숍 자료집 중 4페이지 이내 논문은 '요약'만 제공되는 경우가 있으니, 구매 전에 간행물명, 페이지 수 확인 부탁 드립니다.

4,000원

원문정보

초록

영어
A Hybrid Fault Current Limiter(FCL) which has more advantages in fast response and thermal characteristics than a simple resistive FCL had been proposed by our group. The Hybrid FCL consists of a resistive FCL for reducing the magnitude of the first peak of fault current, and a fast switch for detecting fault current and generating the repulsive force within a cycle in fault situation. In ideal case, the impedance of the fast switch wound with two other kinds of HTS tape is negligibly zero in normal operation. But, during the fault situation, each HTS tape has different quench characteristics because of asymmetric current distribution. And this phenomenon causes effective magnetic flux and this flux opens the switch through the repulsive force applied to a metal plate of the fast switch. The magnitude of the repulsive force affects the switching characteristics of the fast switch. It should be large enough to raise the metal plate up. Otherwise the arc re-out break which are caused by not enough repulsive force to raise the metal plate up can cause unintended operation of the fast switch. In this paper, the numerical calculation of the repulsive force applied to the metal plate of the fast switch in various combinations of HTS tapes was performed by using the short-circuit test and finite element method.

목차

Abstract
 1. 서론
 2. 실험방법
  2.1. 사용선재
  2.2. 권선 및 제작 방법
  2.3. Finite Element Method를 이용한 반밭력 계산
 3. 실험결과
  3.1. 단락 실험
  3.2. FEM 해석 결과
 4. 결론
 참고문헌

저자

  • 이지호 [ Jiho Lee | 학생회원 : 연세대 대학원 전기전자공학과 통합과정 ]
  • 김영재 [ Young Jae Kim | 학생회원 : 연세대 대학원 전기전자공학과 통합과정 ]
  • 나진배 [ Jin Bae Na | 학생회원 : 연세대 대학원 진기전자공학과 박사과정 ]
  • 최석진 [ Sukjin Choi | 학생회원 : 연세대 대학원 진기전자공학과 박사과정 ]
  • 장재영 [ Jae Young Jang | 학생회원 : 연세대 대학원 진기전자공학과 박사과정 ]
  • 황영진 [ Young Jin I-l wang | 학생회원 : 연세대 대학원 진기전자공학과 박사과정 ]
  • 김진섭 [ Jin Sub Kim | 학생회원 : 연세대 대학왼 전기전자공학과 석사과정 ]
  • 고태국 [ Tae Kuk Ko | 정회원 : 연세대 전기전자공학과 정교수 ] 교신저자

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국초전도저온학회 (구 한국초전도저온공학회) [The Korean Society of Superconductivity and Cryogenics (KSSC)]
  • 설립연도
    1998
  • 분야
    공학>전기공학
  • 소개
    21세기 핵심기술인 초전도공학과 저온공학분야의 기술 수준을 향상시키고, 선진 외국의 관련 학회와의 국제 교류 뿐만 아니라 이 분야에서 산.학.연의 학술활동 및 기술교류의 구심점으로의 그 역할을 성실히 수행하고자 한다.

간행물

  • 간행물명
    한국초전도·저온논문지 (구 한국초전도저온공학회논문지) [Progress in Superconductivity and Cryogenics]
  • 간기
    계간
  • pISSN
    1229-3008
  • eISSN
    2287-6251
  • 수록기간
    1999~2026
  • 등재여부
    KCI 등재,SCOPUS
  • 십진분류
    KDC 427 DDC 537

이 권호 내 다른 논문 / 한국초전도·저온논문지 (구 한국초전도저온공학회논문지) Vol.13 No.1

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장